Related Manuals for BAFANG DP C171.CAN
Summary of Contents for BAFANG DP C171.CAN
-
Page 1: Table Of Contents
7 USER MANUAL FOR DP C171.CAN CONTENT 7.1 Important Notice 7.6.3 Selection mode 7.2 Introduction of Display 7.6.4 Headlights / backlighting 7.3 Product Description 7.6.5 Walk Assistance 7.6.6 Battery capacity indication 7.3.1 Specifications 7.6.7 USB charge function 7.3.2 Functions Overview 7.7 Settings... -
Page 2: Important Notice
• Do not clean the display with a steam jet, high-pressure cleaner or water hose. 7.2 INTRODUCTION OF DISPLAY • Model: DP C171.CAN BUS The label marking is as follows: • The housing material is PC and Acrylic, and the button material is made of silicone. -
Page 3: Product Description
• Service • USB charge function • Bluetooth function (it can be connected to the phone to use the Bafang Go APP). • The SEGMA heart rate monitor can be con- nected to display the heart rate in real time. -
Page 4: Display
7.4 DISPLAY Display of battery capacity in real time. Menu. Service: please see the service section. Digital speed display. Speed mode , top speed (MAXS) - Average speed (AVG). Kilometer stand, Daily kilometers (TRIP) - Total kilometers (TOTAL). Data: Display data, which corresponds to the current mode. -
Page 5: Key Definition
7.5 KEY DEFINITION Light On/Off System On/Off Down OK/Enter 7.6 NORMAL OPERATION 7.6.1 Switching the System ON/OFF Press and hold (>2S) on the display to turn on the system. Press and hold (>2S) again to turn off the system. If the "automatic shutdown time" is set to 5 minutes (it can be set with the "Auto Off" function, See "Auto Off"), the display will automatically be turned off within the desired time when it is not in operation. -
Page 6: Selection Mode
7.6.3 Selection mode Briefly press (<0.5s) the button to see the different trip modes. Trip: daily kilometers (TRIP) - to- tal kilometers (TOTAL) - Maximum speed (MAXS) - Average speed (AVG) - Remaining distance (RANGE) - Output power (W) - Energy consumption (C (only with torque sensor fitted)). 7.6.4 Headlights / backlighting Hold (>2S) the button to activate the headlight and backlight. -
Page 7: Walk Assistance
7.6.8 Bluetooth function This display can connect via Bluetooth to mobile phone and communicate with Bafang Go APP. The Information of motor, display, battery, sensor and controller infor- Bars Charge in Percentage mation can be displayed on mobile phone, and it can update the firmware of Pedelec by ≥90%... -
Page 8: Settings
7.7 SETTINGS After the display is turned on, quickly press (<0.3S) the button twice to access the “MENU” interface. pressing the button, you can select and reset the options. Then press (<0.3S) the button twice to confirm your selected option and to return to the main screen. - Page 9 sensitivity for 0-5). Chose 0 means turn off button until the “OFF” appears on the the light sensitivity. display (as shown below). And then press Once you have chosen your desired selec- to increase or to reduce (brightness tion, press (<0.3S) the button twice for 1-9minute).
-
Page 10: View Information
7.7.2 View Information All data in this item cannot be changed, only to be viewed. 7.7.2.1 Wheel Size When the system is on, quickly press (<0.3S) the button twice to access the “MENU” interface, repetitively press the button until the “LUd” appears on the display (as shown below). - Page 11 Once you have viewed your desired informa- the “MENU” interface, repetitively press the tion, press (<0.3S) the button twice to button until the “dSc (Display Software save and return to the main screen, or you check)” appears on the display (as shown can press (<0.3S) the button once to below).
- Page 12 7.7.2.8 BMS software info When the system is on, quickly press (<0.3S) the button twice to access the “MENU” interface, repetitively press the button until the “dSc (Display Software check)” appears on the display (as shown below). Once you have viewed your desired informa- tion, press (<0.3S) the button twice to save and return to the main screen, or you...
- Page 13 7.7.2.11 Battery Information Content Explanation When the system is on, quickly press Charging cycles (number) (<0.3S) the button twice to access the “MENU” interface, repetitively press the Maximum not charging time (Hr) button until the “b01” appears on the Recently not charging time (Hr) display (as shown below).
-
Page 14: Error Code Definition
7.8 ERROR CODE DEFINITION The display can show the errors of a pedelec. If an error is detected, the wrench icon appears on the display and one of the following error codes will be displayed. Note: Please read carefully the description of the error code. When the error code appears, please first restart the system. - Page 15 Error Declaration Troubleshooting 1. Turn off the system and let the pedelec cool The protection temperature inside down. the controller has reached its maxi- 2. If the problem persists, please contact your mum protection value retailer. Error with the temperature sensor Please contact your retailer.
- Page 16 Error Declaration Troubleshooting Detection circuit for 15V has an error Please contact your retailer. Detection circuit on the keypad has Please contact your retailer. an error WDT circuit is faulty Please contact your retailer. Total voltage from the battery is too Please contact your retailer.