Marantz AV8805 Owner's Manual page 189

Contents Connections
HDMI Setup
Make settings for HDMI Audio Out, HDMI Pass Through and HDMI
Control settings.
NOTE
0 When "HDMI Pass Through" and "HDMI Control" is set to "On", it consumes more
standby power. (" HDMI Pass Through " (v p. 189), " HDMI
Control " (v p. 191))
If you are not using this unit for an extended period, it is recommended that you
unplug the power cord from the power outlet.
o HDMI Audio Out
Select HDMI audio output device.
AVP
(Default):
TV:
0 When the HDMI Control function is activated, priority is given to the TV audio
setting. (v p. 151)
0 When the power of this unit is on and "HDMI Audio Out" is set to "TV", audio is
output as 2-channel from the HDMI OUT connector.
Front panel Display
Playback
Play back through speakers connected to
power amp. (Audio is output from the
PRE OUT connector on this unit.)
Play back through TV connected to the
unit.
Rear panel
Settings
o Vertical Stretch
Sets whether video signals are vertically stretched or not.
On:
Off
(Default):
0 "Vertical Stretch" can be set when "i/p Scaler" is set to anything other than
"Off". (v p. 195)
o HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On:
Off
(Default):
189
Remote
Tips Appendix
Stretches video signals vertically.
Does not stretch video signals vertically.
Transmits the selected HDMI input
through this unit's HDMI output when this
unit is in standby power mode.
No HDMI signals are transmitted through
this unit's HDMI output in standby power
mode.
Index