Marantz AV8805 Owner's Manual page 158

Contents Connections
Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to I can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2 and
ZONE3.
A Input source (v p. 99)
B Volume (v p. 100)
C Sound mode (v p. 138)
D Audyssey (Audyssey MultEQ
Audyssey Dynamic Volume
E " M-DAX " (v p. 179)
F "Adjusting the volume of each channel to match the input source
(Channel Level Adjust)" (v p. 133)
G "Displaying your desired video during audio playback (Video
Select)" (v p. 135)
H "Adjusting the picture quality for your viewing environment
(Picture Mode)" (v p. 136)
I " HDMI Video Output " (v p. 194)
0 Press and hold SMART SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0 Internet Radio Station
Front panel Display
Playback
XT32, Audyssey Dynamic EQ
®
, Audyssey LFC™) (v p. 182)
®
Rear panel
Settings
2
Press ZONE SELECT to switch "MAIN", "ZONE2" or
"ZONE3".
The button for the selected zone is lit.
3
Press and hold the desired SMART SELECT until
"Smartz Memory", "Z2 Smartz Memory" or "Z3
Smartz Memory" appears on the display.
The current settings will be memorized.
z is displayed the number for the SMART SELECT button you
pressed.
,
®
o Changing the Smart Select Name
The MAIN ZONE Smart Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see "Smart Select
Names" (v p. 250).
158
Remote
Tips Appendix
Index