Samsung VP-D361W Service Manual page 166

Operating Instructions
Preparation
Connecting a Power Source
✤ There are two types of power source that can be connected to your Camcorder.
- The AC Power adapter and AC Cord: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a house hold power source to use the Camcorder without worrying
about the battery power. You can keep the Battery Pack attached; the battery
power will not be consumed.
1. Turn the [Power] switch to [OFF].
2. Connect the AC Power adapter (AA-E8 Type) to the AC Cord.
3. Connect the AC Cord to a wall socket.
The plug and wall socket type may differ according to your resident country.
4. Connect the DC cable to the DC jack of the Camcorder.
5. Set the Camcorder to each mode by holding down the tab on the [Power]
switch and turning it to the [CAMERA] or [PLAYER] mode.
About the Operating Modes
✤ The operating modes are determined by the position of the [Power] switch and the [Mode] switch.
✤ Set the Operation Mode by adjusting [Power] switch and [Mode] switch before operating any functions.
Mode Name
[Power] Switch
[Mode] Switch
(VP-D363(i)/D364W(i)
/D365W(i) only)
[Note]
The <M.Cam> and the <M.Player> Modes are only enabled on VP-D363(i)/ D364W(i)/ D365W(i).
■
ENGLISH
Preparation
Using the QUICK MENU
✤ QUICK MENU is used to access Camcorder functions by using the [QUICK MENU] button.
✤ QUICK MENU provides easier access to frequently used menus without using the [MENU] button.
✤ Functions available using the QUICK MENU are as below:
Camera Mode
Setting the Digital Image Stabilizer (DIS) ➥page 55
■
Programmed Automatic Exposure Modes (Program AE) ➥page 49
■
Setting the 16:9 Wide ➥page 54
■
Setting the White Balance (White Balance) ➥page 51
■
Setting the Shutter Speed (Shutter)- Only can be operated by using the QUICK MENU
■
➥page 47
Setting the Exposure (Exposure)- Only can be operated by using the QUICK MENU
■
➥page 47
Setting the Back Light Compensation (BLC) ➥page 41
■
M.Cam Mode
Setting the Memory Type (Memory Type) ➥page 70
■
Setting the White Balance (White Balance) ➥page 51
■
Setting the Photo Quality (Photo Quality) ➥page 71
■
Setting the Exposure (Exposure)- Only can be operated by using the QUICK MENU
■
➥page 47
Setting the Back Light Compensation (BLC) ➥page 41
■
M.Player Mode
Setting the Memory Type (Memory Type) ➥page 70
■
Playing Moving Images (MPEG) on the Memory Card (M. Play Select) ➥page 80
■
Deleting Photo Images and Moving Images (Delete) ➥page 76
■
Protection from accidental Erasure (Protect) ➥page 75
■
Marking Images for Printing (Print Mark) ➥page 84
■
For example: Setting the White Balance
1. Press the [QUICK MENU] button.
The quick menu list will appear.
2. Move the [Zoom] lever up or down to select <White Balance>, then press the [OK] button.
3. Move the [Zoom] lever up or down to select desired mode (Auto, Indoor, Outdoor or Custom
WB), then press the [OK] button.
4. To exit, press the [QUICK MENU] button.
20 20
11-6
All manuals and user guides at all-guides.com
<Camera Mode> <Player Mode>
ENGLISH
QU
ME
Power Switch
<M.Player Mode>
<M.Cam Mode>
1
STBY
SP
DIS
Off
Program AE
16:9 Wide
White Balance
Shutter
Exposure
BLC
Q.MENU Exit
2
STBY
SP
DIS
Program AE
16:9 Wide
...
White Balance Auto
†
Shutter
Exposure
BLC
Q.MENU Exit
4
STBY
SP
<When the Outdoor option was selected>
ICK
NU
19 19
0:00:10
60min
0:00:10
60min
A
0:00:10
60min
Samsung Electronics