Foxwell NT819TS User Manual

Automotive diagnostic & tpms scanner

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Trademarks

FOXWELL is trademark of Shenzhen Foxwell Technology Co., Ltd.

All other marks are trademarks or registered trademarks of their respective

holders.

Disclaimer

The information, specifications and illustrations in this manual are based on the

latest information available at the time of printing.

Foxwell reserves the right to make changes at any time without notice.

Visit our website at

www.foxwelltech.us

For Technical Assistance, send us email at

support@foxwelltech.com

Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0

Table of Contents

Need help?

Do you have a question about the NT819TS and is the answer not in the manual?

Questions and answers

Summary of Contents for Foxwell NT819TS

Page 1 Disclaimer The information, specifications and illustrations in this manual are based on the latest information available at the time of printing. Foxwell reserves the right to make changes at any time without notice. Visit our website at www.foxwelltech.us For Technical Assistance, send us email at support@foxwelltech.com...
Page 2: One-Year Limited Warranty
FOXWELL. 3 The customer shall bear the cost of shipping the product to FOXWELL. And FOXWELL shall bear the cost of shipping the product back to the customer after the completion of service under this limited warranty.
Page 3 The customer will be billed for any parts or labor charges not covered by this limited warranty. d) FOXWELL will repair the Product under the limited warranty within 30 days after receipt of the product. If FOXWELL cannot perform repairs covered...
Page 4 (the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 5: Safety Information
● Fuel, oil vapors, hot steam, hot toxic exhaust gases, acid, refrigerant and other debris produced by a malfunction engine can cause serious injury or death. Do not use the tool in areas where explosive vapor may collect, Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 6 ● Block drive wheels before testing with engine running. Put the transmission in park (for automatic transmission) or neutral (for manual transmission). And never leave a running engine unattended. ● Do not wear jewelry or loose fitting clothing when working on engine. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 7: Table Of Contents
8 VEHICLE IDENTIFICATION ......................28 8.1 V ........................29 EHICLE ONNECTION 8.2 VIN R ..........................29 EADING 8.2.1 Automatic Read ........................ 30 8.2.2 Manual Entry ........................31 8.3 M ........................31 ANUAL ELECTION Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 8 12.2 PDF R .......................... 70 EPORT 12.3 D ........................72 LAYBACK 13 SETTINGS ............................ 74 13.1 U ............................74 NITS 13.2 L ..........................75 ANGUAGE 13.3 F ..........................75 13.4 M ........................75 ODULE ORTING Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 9 13.9 G ..........................78 ENERAL 13.10 U ..................... 78 NINSTALL EHICLE OFTWARE 13.11 C ........................79 LEAR APP DATA 13.12 P ........................79 RINT ETTINGS 13.13 A ...........................81 BOUT 14 REMOTE SUPPORT ........................82 Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 10: Bold Text
Bold text is used to highlight selectable items such as buttons and menu options. Example: Select Diagnostic from the Home screen of the NT819TS application. 1.2 Symbols and Icons 1.2.1 Solid Spot Operation tips and lists that apply to specific tool are introduced by a solid spot ●.
Page 11: Introduction
Do not soak scanner as water might find its way into the scanner. 2 Introduction The brand new Android scan tool NT819TS inherits the same Foxwell advantages in car fault diagnostic tech, such as multi manufacturer coverage, service functions and accurate test data, making it the perfect tool for busy garages or workshops, who need the latest technology at unbeatable value.
Page 12 ⑦ Speaker – outputs audio. IMPORTANT Do not use solvents such as alcohol to clean display. Use a mild nonabrasive detergent and a soft cotton cloth. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 13: Accessories
Figure 2-4 Accessories 2.3 Technical Specifications Item Description Screen 7’’ diagonal, daylight readable color LCD screen; 1024*600 pixel Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 14: Getting Started
3.1 Powering up the Scanner Before using the NT819TS applications (including updating the scanner), please make sure to provide power to the scanner. The unit operates on any of the following sources: Internal Battery Pack ●...
Page 15: Shutting Down The Scanner
2. Click the Power off to shut down or Reboot to restart. 3.3 Screen Layout of Home Screen After the scanner turning on, the screen show main menu of the application. Figure 3-1 Sample Home Screen Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 16: Application Menu
Maintenance - leads to screens for common used special functions like ● Oil light reset, EPB, BRT, and DPF etc. Update - leads to screens for Foxwell ID registration and updating the ● scanner. Data Manager - leads to screens for saved screenshots, pictures and test ●...
Page 17: My Account
This section introduces user account registration, login, device activation and other information. When My Account application is selected, a menu with available options displays. My Account Menu options typically include: My Account ● My Products ● Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 18: Registration
You are allowed to create a Foxwell ID with the built-in client. To register with built-in client: 1. Press My Account or Update from home screen of NT819TS diagnostic application, the user login page will show, then press Free registration button to register an account.
Page 19 4. “The account has been created successfully” message will appear if you registered successfully. Figure 4-5 Sample Registration Done Screen 5. The serial number will show after registration. Click Submit to activate the product or press to back. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 20: Sign In
Figure 4-6 Sample Product Activation Screen 4.2 Sign in Press My Account or Update from home screen of NT819TS diagnostic application, the user login page will show, enter your FOXWELL ID and password, and press Sign in button to sign in.
Page 21 2.Click Submit to continue the activation and press to give up activation. Figure 4-9 Sample Product Activation Submit Screen 3. “Product is activated successfully” message will appear if activate successfully. Figure 4-10 Sample activate success Screen Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 22: M Yaccount
This option allows you to log on your e-mail and send feedback and suggestions about Foxwell products. To send feedback and suggestions about Foxwell products: 1. Press My Account from home screen of the NT819TS diagnostic application. 2. Press Feedback and Suggestions option to show Feedback page, there are two options--Diagnosis Feedback and General Feedback.
Page 23 Press Save button to save the feedback. Or press Email button to send if you have an email account. Figure 4-14 Sample Feedback Edit Screen Figure 4-15 Sample Email Select Screen Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 24: Update
The scanner can be updated to keep you stay current with the latest development of diagnosis. This section illustrates how to register and update your scan tool. You can register both on Foxwell website or by the built-in update client.
Page 25: Vci Manager
VCI. VCI unbind & rebind： 1. Click VCI Manager application on the NT819TS home screen. 2. After clicking Unbind a VCI dongle, it will display whether to unbind the current VCI. When clicking OK, it will execute unbind, rebind, and refresh the vehicle.
Page 26 Figure 6-1 Sample Unbind a VCI dongle Figure 6-2 Sample Unbinding Confirmation Prompt Figure 6-3 Sample Unbinding Current VCI Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 27: Firmware Update
Figure 6-4 Sample Bind New VCI Successfully Figure 6-5 Sample Rescan Vehicle Software 7 Firmware Update This application allows you to update the firmware of NT819TS. To update the firmware: 1. Click the Update application on the NT819TS home screen.
Page 28: Vehicle Identification
Each selection you make advances you to the next screen. Exact procedures may vary somewhat by vehicle. It typically identifies a vehicle by any of the following means: VIN Reading ● Manual Selection ● Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 29: Vehicle Connection
8.2 VIN Reading VIN button on the title bar is a shortcut for VIN reading menu, which includes Automatic Read, Manual Entry, eliminating the need for navigating through complicated car identification process. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 30: Automatic Read
(VIN). To identify a vehicle by Automatic Read: 1. Select Diagnostic from home screen of the NT819TS application. 2. Click VIN and choose Automatic Read from the option list. 3. When the scan tool builds connection with the vehicle, the VIN number displays.
Page 31: Manual Entry
Manual Entry allows to identify a vehicle by inputting VIN manually. To identify a vehicle by Manual Entry: 1. Select Diagnostic from home screen of the NT819TS application. 2. Click VIN and choose Manual Entry from the option list. 3. Press Keyboard button to input a valid VIN code and press OK to continue.
Page 32: Smart Vin
(VIN). To identify a vehicle by Smart VIN: 1. Select Diagnostic from home screen of the NT819TS application. 2. A screen with vehicle manufacturers displays. Select the area where the vehicle manufacturer from. A menu of all vehicle manufacturers displays.
Page 33: Manual Vehicle Selection
VIN characters, such as model year, and engine type. To identify a vehicle by manual vehicle selection: 1. Select Diagnostic from home screen of the NT819TS application. 2. A screen with vehicle manufacturers displays. Select the area where the vehicle manufacturer is from.
Page 34: Vehicle History
To identify a vehicle by Vehicle History: 1. Select Diagnostic from home screen of the NT819TS application. 2. Select History button at the top of the diagnostic page and the diagnostic records will display.
Page 35: Vehicle Identification
To perform an automatic system scan: 1. Press Quick Scan option to start. 2. To pause the scan, press the Pause button on the screen. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 36 4. Press Report to create an overview of installed control units and their system status, or press Save to save the report. Press Erase to clear the information. Figure 9-4 Sample DTC Save Screen Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 37: Control Modules
Control Modules displays all controllers available of the vehicle manufacturer. The controllers listed on the menu do not mean that they are installed on the vehicle. It is useful for technicians who are familiar with the vehicle specifications. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 38: Diagnostic Operations
Live Data ● ECU Information ● NOTE Not all function options listed above are applicable to all vehicles. Available options may vary by the year, model, and make of the test vehicle. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 39: Read Codes
DTC set. It is a good function to help determine what caused the fault. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 40: Clear Codes
To clear codes, make sure that the ignition key is switched to ON with the ● engine off. Clear Codes does not fix the problem that caused the fault! DTCs should ● only be erased after correcting the condition(s) that caused them. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 41: Live Data
● Figure 9-14 Sample Function Menu Screen 9.2.3.1 All Data All Data menu lets you view all live PID data from a selected control module. To view all live PID data: Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 42 2. Press OK to complete the selection and all readings will be displayed in text format by default. Figure 9-16 Sample Live Data Selection Screen Figure 9-17 Sample Live Data Screen Name Description Help To provide help information of a PID Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 43 Compare Mode - If that vehicle comes in is with a problem, you can easily ● compare the faulty sensor and parameter readings to the good readings, and you will be alarmed when a faulty sensor reading is detected. Figure 9-19 Sample Live Data Screen Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 44 Merge Graph: merges multiple PID plots into one coordinate, so you can ● easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 45 3. To deselect an item, tap the line again. Alternatively, tap SELECT ALL or Deselect ALL to select or deselect all items at once. 4. Press OK to complete the selection, and all selected items display. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 46 Figure 9-25 Sample Live Data Record Screen 2. Press Stop button to create a record, then press OK to save the record into Data Playback of Data Manager. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 47: Ecu Information
Press to print the information if need be. Press to exit. 4. Press Save to store ECU information screen and Press OK to complete save or Press Cancel to give up. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 48: Active Tests
2. Select an option to start the test and live data of the selected test displays. 3. Follow on-screen instructions to make proper selections and operations to complete the tests. 4. Press to exit. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 49: Complaints
9.3 Complaints This function lets the customers sending back the complaints or feedback to Foxwell server with one touch during the diagnostic process and allows for quicker and more accurate fixes for diagnostic troubles and bugs. To make a complaint: Click during the diagnostic process when face a failure.
Page 50: Maintenance
The manual reset procedure can be interrupted and aborted if the ignition key position is changed. Auto Reset - Auto Reset is a bi-directional communication procedure ● directed by the service tool. The service tool displays guides for you Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 51: Electronic Parking Brake (Epb) Service
Perform control function and reset function on Opel EPB vehicles - ● allows to apply/release park brake cable service, provide park brake cable service replacement procedures and calibrate the parking brake systems after brake service. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 52: Battery Replacement (Brt)
Perform BRT on BMW/Volvo cars - after making several selections to ● confirm your vehicle model, you can select Display data, Validate Battery or Clear codes from Function menu. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 53: Diesel Particulate Filter (Dpf) Regeneration
After tooth learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'tooth not learned' is present, tooth learning must be performed. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 54: Tire Pressure Monitoring System Programming
11 TPMS Service Operations The TPMS application is used to check the TPMS sensor conditions, program the Foxwell sensor T10, perform the TPMS Relearn procedure and basic TPMS diagnostic functions. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 55: Navigation
Figure 11-2 Sample Vehicle Selection Screen 11.1.1 TPMS Service Screen Layout The TPMS service typically include three functions: Trigger/ Programming/ Learn Help Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 56: Trigger Operations
Display Tablet will send low frequency signal to trigger the sensor. The sensor data of the selected wheel will display on the table of the screen once the sensor is successfully activated and decoded. Figure 11-4 Sample Trigger TPMS Screen Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 57 Table 11-1 Possible results for triggering 11.2 Programming Operations The programming function is used to program the sensor data to the Foxwell sensor T10 and replace the faulty senor (poor battery life or malfunction). The NT819TS is easy to use with a proven efficiency and guaranteed accurate results.
Page 58 – displays the retrieved sensor IDs by OBD NOTE: Programming function will only work with Foxwell sensor T10. Currently, there are two models available: Clamp-in Sensor and Snap-in Sensor, both with two types, one with 433MHz frequency, and one with 315MHz frequency.
Page 59 Figure 11-6 Sample ID Input Screen Place the proper Foxwell sensor T10 near the top right of the Display Tablet to start programming. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 60 11.2.2 Clone by Activation This function allows user to bypass OBD II and automatically write in the retrieved original sensor data to the Foxwell sensor T10. It is used after the original sensor is triggered. To perform Clone by Activation, user needs active the installed sensor firstly, if succeed, the sensor ID will display.
Page 61 Figure 11- 8 Sample Clone by Activation Function Screen Then put the Foxwell T10 sensor that need to be programmed close to the device 0-20cm and sensors that not need to be programmed beyond 100cm. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 62 Select the specific wheel on the screen. Tap the Automatic Create functional button on the screen. Place the proper Foxwell sensor T10 near the top right of the Display Tablet to write the new created sensor ID into the Foxwell sensor T10.
Page 63: Learn Help
Copy by OBD button. Figure 11-11 Sample Copy by OBD Function Screen Place the proper Foxwell sensor T10 near the top right of the Display Tablet, and tap OK to start programming the saved sensor information to the Foxwell T10.
Page 64 5. Connect the TPMS tool to the OBDII interface, and use OBD relearn function to write the sensor ID. 6. Keep the ignition switch on (ON/RUN/START) and reactivate each sensor in turn. 7. Turn off and then turn on the ignition on. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 65 (the tire pressure light is off). NOTE: Different models have different Automatic relearn methods. Please read the relearn procedure carefully before performing the relearn function. 11.3.3 Static Relearn Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 66 Use one of the following method to copy according to the actual situation. 1. Copy by activation 2. Copy by manually input the sensor IDs. (notice the data format is decimal or hexadecimal) Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 67: Data Manager
12.1 Image Image option leads to screens for review of stored screenshots. In case a failure of NT819TS application or the Android system occurs, please just take a screenshot and send it to our team to help with the troubleshooting.
Page 68 Figure 12-3 Sample Screenshot Screen 2. Add a description of the image, and press the OK to save or press cancel button to give up. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 69 Figure 12-4 Sample Screenshot Screen 12.1.2 Review Image To review the screenshots: 1. Press Data Manager from home screen of NT819TS diagnostic application. 2. Press Image from Data Manager. 3. Press Diagnostic Screenshot for application menu screenshot or Press System Screenshot for system menu screenshot, then all available pictures will be displayed.
Page 70: Pdf Report
PDF icon on the test screen, add a description and press OK button to save. 12.2.1 How to Create a PDF Report To create a PDF report: 1. Press Data Manager from home screen of NT819TS diagnostic application. 2. Press Report from Data Manager. 3. Press any reports saved.
Page 71 Email to share the report. Figure 12-10 Sample of Report edit Screen 12.2.2 Review PDF Report To review the PDF reports: 1. Press Data Manager from home screen of NT819TS diagnostic application. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 72: Data Playback
Playback speed and direction (forward or reverse) can also be controlled. To review recorded live data: 1. Press Data Manager from home screen of NT819TS diagnostic application. 2. Press Data Playback and all available records display.
Page 73 Merge Graph or press the tab Multi Graph to view multiple plots. Figure 12-15 Sample Graph Screen 5. To move forward or reverse back of the playing, just drag the progress bar forward or reverse. Press the button to stop. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 74: Settings
Selecting Unit opens a dialog box that allows you to choose between Imperial customary or metric units of measure. To change the unit setup: 1. Press Settings from home screen of the NT819TS diagnostic application. 2. Press Unit and available unit system display. 3. Select a unit system.
Page 75: Language
Select Language opens a screen that allows you to choose system language. To configure system language: 1. Press Settings from home screen of the NT819TS diagnostic application and select Language. Then all available language options display. 2. Select your preferred language to change.
Page 76 Figure 13-4 Sample Release and Dwell Update Module 3. Click to display whether to apply the current settings interface, click OK to apply the current changes, click Cancel to discard the current changes. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 77: Sort Tiles
This option allows you to change the sort for Brand of vehicles. There are two sorting methods available by alphabet or by frequency of use. To change sort 1. Press Settings from home screen of the NT819TS diagnostic application, and select Sort Tiles. 2. Select your preferred sort order.
Page 78: Automatic Update
1. Press Settings from home screen of the NT819TS diagnostic application, then select Remote control. 2. Select your preferred tool. 13.7 Automatic Update This option allows you to enable/disable automatic update notice. If it is enabled, an orange update mark will show on the upper right of the diagnostic software icon whenever there is a new version available.
Page 79: Clear App Data
This option allows you to print any data or information anywhere and anytime either via PC network or Wi-Fi. To setup the printer connection: 1. Tap the Settings application on home screen of NT819TS. 2. Tap the Printing Settings option on the option list. Figure 13-9 Sample Print Settings Screen 3.
Page 80 5. Choose the right printer. Press for return. Figure 13-12 Sample of Printer Screen 6. Select a available printer, then press PRINT TEST PAGE button at the right-bottom. Press for return. Automotive Diagnostic & TPMS Scanner NT819TS User's Manual V1.0...
Page 81: About
Figure 13-14 Sample of File Printing Screen NOTE 1. Please make sure the printer and the NT819TS in the same Wi-Fi or Network when printing. 2. If Mopria Print Service driver can’t workable for your printer, please download the driver to work for your printer on Print Service Manager.
Page 82: Remote Support
About how to set the tool of default, please refer to 12.5 Remote control. To use QuickSupport for to remote control: 1. Click the Remote Control icon on the main menu of the NT819TS to start TeamViewer QuickSupport. Press for return.

Foxwell NT819TS User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Foxwell NT819TS

Summary of Contents for Foxwell NT819TS

Table of Contents