Table of Contents
Advertisement
RS2602 EN
8/21/02
10:28 AM
Radio
EN
TIMER
ROCK
CUSTOM/FLAT
/CLASSIC
AUTO PROG.
1. Press SOURCE to select TUNER.
2. Press BAND to select between AM or FM radio
band.
Tip: Your audio system has 32 preset stations.
Tuning to a Station
Press SKIP FORWARD
to select frequencies.
Using Presets
The tuner can be in either
TUNE or PRESET mode.
When in PRESET mode, the PROG light is on.
Press SKIP BACKWARD
WARD
on the main system or PRESET UP or
DOWN on the remote control to access the previous
or next preset station. The display first shows the pre-
set program number and after a few seconds, the fre-
quency and preset program number will be displayed.
(FMPR:01 is FM preset 1)
Auto Preset
Programming
(for FM only)
Press and hold BAND
button for 2 seconds to scan stations in FM band. The
stations will then be stored as preset channels. A maxi-
mum 32 stations can be stored. Beware of your preset
channels being erased accidentally because the scan-
ning and storing process is automatic upon pressing
the button. You can stop the automatic scan by press-
ing any button, but the erased stations cannot be
recovered.
9
Page 12
CLOCK
PROG./SET
VOLUME
POP/JAZZ
Setting Presets
TUNE/PRESET
1. Press TUNE/PRESET button to enter TUNE mode.
2. Press SKIP FORWARD
3. Press the PROG/SET button once.
4. The most recently accessed program location will
be displayed.
5. If a different program location is preferred, press
SKIP BACKWARD
move to the desired preset number (1-32).
6. Press PROG/SET to store the selected frequency at
that preset.
Suppressing Stereo Signal
/ BACKWARD
Press FM ST to toggle between FM mono and stereo
for stereo FM stations. (Remote Only)
z
87.50 MH
or SKIP FOR-
PR:01
/ BACKWARD
to access the desired frequency.
/ FORWARD
to
Hide quick links:
Advertisement
Table of Contents
