Part Identification Chart - ICON Health & Fitness Pro-Form 150i User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Washer M10 Split M10 Curved
M10 Washer
(63)–6 (64)–6 Washer (80)–2 Washer (62)–2
M4 x 16mm
M8 Locknut M10 Locknut
Screw (56)–4
(77)–1
(60)–6
M6 Bolt Set (67)–2 M8 x 20mm
M8 x 38mm Bolt
Screw (61)–6 (59)–6
M10 x 53mm Screw (73)–1
M10 x 20mm M10 x 38mm Screw (75)–2
Screw (74)–5
M10 x 70mm Screw (76)–2
M10 x 60mm Bolt (72)–1
6