Supero SUPERSERVER 1026GT-TRF User Manual page 80

S S
UPER ERVER 1026GT-TRF User's Manual
32Bit Data Transfer
Select Enable to enable 32-bit IDE data transferring support. The options are
Enabled and Disabled.
PCI/PnP Confi guration
Clear NVRAM
Select Yes to clear the NVRAM (Non-volatile random-access memory) during sys-
tem boot. The options are No and Yes.
Plug & Play OS
Selecting Yes allows the OS to confi gure Plug & Play devices. (This is not required
for system boot if your system has an OS that supports Plug & Play.) Select No to
allow the AMI BIOS to confi gure all devices in the system.
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Select
64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96, 128,
160, 192, 224 and 248.
PCI IDE BusMaster
When enabled, the BIOS uses PCI bus mastering for reading/writing to IDE drives.
The options are Disabled and Enabled.
SR-IOV Support
Single Root I/O Virtualization is an industry-standard mechanism that enables a
device to share its resources among several virtual machines. SR-IOV is capable of
partitioning a PCI function into several virtual interfaces for sharing the resources
of a PCI Express device under a virtual environment. The options are Disabled
and Enabled.
PCI-E Slot 1~Slot 4 x16, PCI-E Slot 5~Slot 6 x8, PCI-E Slot 7~Slot 8x4
Use this setting to enable or disable any of the PCI slots indicated above. The op-
tions are Disabled and Enabled.
Onboard LAN Option ROM 1 Select
The item selects the type of onboard option ROM to load. The options are PXE
and iSCSI.
7-14