Harken 3386 Instructions

WARNING! Strictly follow all instructions to avoid an accident, damage to your vessel,
personal injury, or death. See www.harken.com/manuals for additional safety information.
1
2
3
4
8
Sideplate alpha
Loctite is a registered trademark of Henkel AG & Company KGaA.
LOUP is a registered trademark of Yale Cordage.
Spectra is a registered trademark of Honeywell International, Inc.
Dyneema is a registered trademark of DSM Dyneema.
Heli-Coil is a registered trademark of Emhart Teknologies Inc.,Worldwide
Block Sheave Ø Screw
57 mm HFS796
3214
3230 75 mm HFS806
3245 100 mm HFS1271 MP-3022
3255 125 mm HFS1275 MP-3023
3214, 3230, 3245, 3255, 3386
N15W24983 Bluemound Road, Pewaukee, WI 53072-4974
Telephone: (262) 691-3320 • Fax: (262) 701-5780 • Web: www.harken.com • Email: harken@harken.com
Parts
1) Head
2) Sideplates
3) Sheave
4) Deadend post
5) Mouth
6) Hex key
7) Blue Loctite
8) Head securing line
5
Heli-Coil
threaded insert
Isolator Sideplate beta Roller cage assembly
MP-3020 AL-3701
MP-3021 AL-3727
AL-3752
AL-3770
INSTRUCTIONS
Loop Block
Part
No.
3214, 3386
3230
3245
adhesive
®
3255
Loop and/or high-strength lashing line
6
When choosing a Harken Loup
working load in basket configuration exceeds the maximum working load
of the block.
When choosing a lashing line, use a breaking load that is double the block's
breaking load to account for strength loss from:
1. Knots slipping or breaking at a much lower load than line breaking load.
Spectra or Dyneema
®
2. Splices slipping or failing due to incorrect type or execution.
3. UV damage increasing with each passing year.
4. Chafing seriously reducing strength.
7
Go to www.harken.com/knots for additional information. If you are not
comfortable choosing line, work with a qualified rigger.
Note: See chart for maximum line diameter that will fit through mouth.
WARNING! Knots weaken line considerably. Consult qualified rigger
or line manufacturer for advice on securing line. Use high-strength
loops or consult rigger for recommendations on lashing. Using the
wrong line, or securing the line improperly, can cause an accident.
Deadend
post
®
Sheave with side balls
Sheave w/side balls Deadend post Heli-Coil Sideplate alpha
HBB85 H-34389A
HBB86 H-34390A
HBB87 H-34391A
HBB88 H-34392B
= Incorrect. Avoid to prevent accidents.
Specifications
Max working load
Sheave
(MWL)
Ø
lb kg
57 mm 2500 1134
75 mm 5000 2268
100 mm 7500 3402
125 mm 11000 4990
You Must Supply
soft-attach, be sure the Loup maximum
®
-type lines require specialized knots.
®
Roller cage
assembly
AL-3238 MS-210
AL-3336 MS-221
AL-3427 MS-251
AL-3515 MS-259
Breaking load
Max line Ø
(BL)
that fits
through mouth
lb kg
5000 2268 5 mm
10000 4536 8 mm
15000 6804 11 mm
22000 9977 14 mm
Sideplate beta
Isolator
Screw
Head securing line
AL-3700 HCP1438
AL-3726 HCP1419
AL-3751 HCP1419
AL-3769 HCP392