Table of Contents
Advertisement
6
Cleaning
WARNING: Keep the skin/body away from hot water.
8. When all the water in the water tank has been emptied, the
Remove all the remaining solution in the water tank and fill the tank with normal tap water up to
the max position. When the tank is full, the
cleaning process.
9. When the self-cleaning process is completed, the appliance will switch off automatically.
6.3 Empty System Function
Use the empty system function before a long period of non-use, for frost protection, and before talking
to a repair agent.
1. When on standby, press and hold the
2.
will then start flashing.
3. Remove the water tank from the appliance.
way. Press
before removing the water tank to return back to standby.
4. When the empty system function is completed, the appliance will switch off automatically.
WARNING: After performing the EMPTY SYSTEM FUNCTION; press the hot water button
until water comes out of the spout when the coffee maker is reused again.
6.4 Manual Rinsing
You can manually rinse to clean the coffee nozzle after use. If the appliance has not been used for a long
period of time, a manual rinse may be a good idea.
1. When in standby, press and hold the
2. The hot water button
go off. The coffee nozzle will then dispense a small amount of water which is used for rinsing.
WARNING: The water that comes out of the coffee nozzle is hot and is collected in the drip
tray underneath. Avoid contact as it splashes around.
3. After rinsing, the appliance will return to standby.
Fully Automatic Coffee Machine / User Manual
will go off. Then the appliance will continue the self-
and the mild espresso button
will light up indicating that the empty system is under
and the hot water button
, the strong espresso button
and self cleaning button
together for 5 seconds.
together.
and the mild espresso button
will flash.
will then
19 / EN
Advertisement
Table of Contents
