5
Operation
Illumination Light
Pre-brewing*
Auto-shutdown time
Cup Volume memory
The pre-brewing function moistens the ground beans in the brewer with a small amount of
water before full extraction. This expands the coffee grounds to build up greater pressure in
the brewer, which helps extract all the oils and bring out the full flavour of the beans.
1. When the machine is on standby, press and hold the
2. The
will then flash and the following buttons will have the following indications for different
settings:
In ECO Mode
In Speed Mode
In Default Settings
3. Press the hot water button for ECO mode, the strong espresso button for Speed Mode and the mild
espresso button for default settings. You'll hear two beeps when the mode has been selected.
(Note: If you are pressing the corresponding lights on the button for each mode, the machine will
not respond).
4. If you would like the setting to remain unchanged, press
machine to return to standby mode.
16 / EN
ECO Mode
No
Yes
10mins
Yes
Hot water button
Lights On
Yes
Flashing
Speed Mode
Yes
No
30mins
Yes
for 5 seconds.
Strong espresso button
Flashing
No
Flashing
again or wait for 5 seconds for the
Fully Automatic Coffee Machine / User Manual
Default Settings
Yes
Yes
20mins
Yes
Mild espresso button
Flashing
Flashing
Lights On