Beko EM 8194 O User Manual page 14

5
Operation
5.4 Adjusting The Volume of Your Coffee/Hot Water
You can save the volume of your desired coffee for both strong espresso and mild espresso as well as
hot water from 25ml to 250ml.
While making your coffee (either strong
espresso or mild espresso), press and
hold the button of the coffee you have
selected. The appliance will continue to
make the cup of coffee for as long as you
hold down the button.
To reset to default/factory settings;
In order to reset to the default settings of coffee and hot water volume selection saved to memory, it is
necessary to reset to factory settings.
1. When the device is off, remove the inner and outer drip pans,
2. Remove the service cover,
3. Remove the brewer,
4. Put the service cover back in place,
5. Press and hold the power on/off button for 5 seconds (Two beeps will sound)
6. Open the service cover,
7. Put the brewer back in place,
8. Close the service cover,
9. Put the drip tray back in place.
Factory settings have been restored.
14 / EN
2x
beep!
When the volume of coffee meets your
desired volume, release the button. If
you hear two beeps, that indicates the
machine has saved this volume of cof-
fee.
Fully Automatic Coffee Machine / User Manual