Remove Two #4 Screws.; Install The New Scalp.; Rotate And Extract Scalp.; Install Two #4 Screws. - Assa Abloy Corbin Russwin PED4000 Series Installation Instructions Manual

Cylinder Dogging
PED4000 / PED5000 Series Exit Devices
Installation Instructions
3
#4
Screws

Remove two #4 screws.

5
Blank
Scalp

Install the new scalp.

For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
4
Dogging slope
Scalp

Rotate and extract scalp.

6
Dogging
slope

Install two #4 screws.

#4
Screws
3
FM611 01/23