Using The Cd Player; Repeat Play - RCA RS1251 User Manual

USING THE CD PLAYER

USING THE CD PLAYER
Shuffle Play The Tracks of All Discs
The differnce between this mode and the previous one is that with the previous mode, the system
continues playing the tracks of all loaded discs repeatedly and CD play mode will not end unless you
press STOP. With this mode, it plays each track once for all loaded discs, after all tracks have been
played, the system stops CD play mode. Follow the steps below to select this mode:
1. If discs have not been loaded or selected yet, follow the section on LOADING DISCS.
2. Press REPEAT repeatedly until the display shows "ALL DISCS".
3. Press SHUFFLE and the display shows "SHUFFLE" and CD play begins automatically.
Shuffle Play the Tracks of One Disc
To shuffle play within one disc only, make sure to load only one disc, otherwise the system will
shuffle play all discs. To select this mode, follow the steps below:
1. If discs have not been loaded or selected yet, follow the section on LOADING DISCS.
2. Press REPEAT repeatedly until the display shows "REPEAT 1 DISC".
3. Press SHUFFLE and the display shows "SHUFFLE" and CD play begins automatically.

REPEAT PLAY

With this function you can set the system playing one or more tracks over and over. You have the
following choices:
•
Repeat play- one track,
•
Repeat play- one disc,
•
Repeat play- all discs,
•
Repeat play- program or,
•
Repeat function off.
Take your pick and follow the steps on the next page to set the system playing the way you like.
RS 1249 /1251 12 9/2/99, 4:22 PM
GB
11