Dvd Camcorder: Basic Recording; Making Your First Recording; Dvd摄像机:基本录像; 第一次录制 - Samsung VP-DC565i Owner's Instruction Book

ENGLISH

DVD Camcorder: Basic Recording

Making your First Recording

1. Connect a power source to the DVD
Camcorder. pages 21, 25
 (A Battery Pack or a AC Power
adapter)
 Insert a disc. page 40
2. Remove the Lens Cover.
3. Open the LCD Screen.
 Set the [Mode] switch to [DISC].
 Set the [Power] switch to
[ (Camera)]. Make sure that
<STBY> is displayed.
 Make sure the image you want
to record appears on the LCD
Screen or Viewfinder.
 Make sure the Battery Level
indicates that there is enough
remaining power for your expected
recording time.
4. To start recording, press the [Start/Stop] button.
 <REC> is displayed on the LCD Screen.
The record mode, recording time, the disc
type, the format mode and the title number are
displayed on the LCD Screen.
5. To stop recording, press the [Start/Stop] button again.
 <STBY> is displayed on the LCD screen after blinking.
 If you press the [Start/Stop] button to record again,
a new title scene will be created.
The scene number will not appear in the STBY mode
but in the REC mode.
Notes
Playing Title Scene. page 62

Up to 253 title scenes can be created on DVD-R/+RW/+R DL/-RW (Video

Mode) discs, and up to 999 on DVD-RW (VR Mode).
Detach the Battery Pack when you have finished recording to prevent

unnecessary battery power consumption.
If the power cable/batteries are disconnected, or recording is disabled during

recording, an error message will appear and the system is switched to the data
recovery mode. While data is being recovered, no other function is enabled.
After data recovery, the system will be switched to the STBY mode.
All manuals and user guides at all-guides.com
1
4 5
REC
DVD摄像机:基本录像
第一次录制
2
3
4. 开始录制，按下[Start/Stop]键。
 LCD上会出现<录像>。
SP
 0:00:20 - RW
录制模式、录制时间、光盘类型、格式化模式和
30 min
VR
标题编号显示在LCD屏幕上。
001
5. 想停止录制，再次按下[Start/Stop]。
 <待机>将会在闪烁后在LCD屏幕上显示。
 如果想继续录制再次按下[Start/Stop]。将会
建立一个新的标题清单标题清单数字将不会在待
机模式下显示没有。
注意

播放标题场景。62页

在DVD-R/+RW/+R DL/-RW（视频模式）光盘上可创建多达253个标题场
景，在DVD-RW（VR 模式）上可创建999个标题场景。
 停止录制之后取下电池，以避免不必要的电量消费。
 若电源线/电池断开连接，或在录像期间停止录像，将会显示一则错误信
息，而系统将会转换至数据恢复模式。在进行数据恢复的时候，任何功能
都不能使用。数据恢复之后系统将转换到待机模式。
中 文
1. 将电源连接至DVD摄像机。
21,25页
 （电池组或者是交流电源适配器）
 插入碟片。40页
2. 取下镜头盖。
3. 打开LCD屏幕。
 设置模式[Mode]开关到光盘
[DISC]。
 设置电源[Power]开关到
[ (Camera)]。确定显示出
<待机>。
 确定你想拍摄的图象出现在LCD
屏幕或者 取景器上。
 确定电池电量水平指示足够使用
到你想要录制的时间。
43