Dukane 6600 Series User Manual page 30

TEST MAIL
CRESTRON SETTINGS
Configure the settings for connecting this device to a CRESTRON product.
Item
ROOMVIEW
CRESTRON CONTROL
IP address
IP ID
Send a test mail to check whether your settings are correct or not.
NOTE:
• If you execute a test, you may not receive an Alert mail. Should this happen, check if network
settings are correct.
• If you entered an incorrect address in a test, you may not receive an Alert mail. Should this
happen, check if the Recipient's Address is correct.
Description
Check this when controlling the unit with a computer.
Check this when controlling the unit with a controller.
Set the IP address of the controller.
Set the IP ID of the controller.
30
7. NETWORK SETTINGS