Dukane 6600 Series User Manual page 24

Advanced settings (Miracast)
Item
WPS settings
HDCP setting
How to connect with the auto push button method
1. Perform to search a Miracast supported device (receiver side) on the Miracast supported wireless terminal
(sender side)
2. Select the projector name (this device) that is displayed in the search result.
The connection between the projector and the Miracast supported wireless terminal (sender) will be established
and start the Miracast transmission.
How to connect with the push button method
1. Display the APPS MENU of this projector.
2. Perform to search a Miracast supported device (receiver side) on the Miracast supported wireless terminal
(sender side)
3. Select the projector name (this device) that is displayed in the search result.
Countdown for requesting the connection will appear on the APPS MENU of this device.
4. button during the countdown
The connection between the projector and the Miracast supported wireless terminal (sender) will be established
and start the Miracast transmission.
How to connect with the PIN code method
1. Display the APPS MENU of this projector.
2. Perform to search a Miracast supported device (receiver side) on the Miracast supported wireless terminal
(sender side)
3. Select the projector name (this device) that is displayed in the search result.
Countdown for requesting the connection will appear on the APPS MENU of this device.
4. button during the countdown
The connection between the projector and the Miracast supported wireless terminal (sender) will be established
and start the Miracast transmission.
Description
Select the WPS method.
• Auto push button: Enable to omit the searching procedure
when receiving the connection request from the Miracast
supported wireless device.
• Push button: Perform the searching procedure to accept
the connection request reply from the Miracast supported
wireless device.
• PIN code: Input the PIN code indicated on the projector
onto the Miracast supported wireless device.
Choose the function of contents protection by HDCP.
• Disable: Does not support HDCP
• Enable: Support HDCP
24
7. NETWORK SETTINGS
Remarks
The default factory setting when
shipped is "Auto Push Button
The default factory setting when
shipped is "Enable".
This projector supports
HDCP2.2.