Lenovo 7Z46 Manual page 178

1. Restart BMC via supported method and reboot the system.
2. Reflash BMC firmware.
3. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
4. If the problem persists, contact technical support.
• FQXPMUP0007K: Unable to obtain the installed version of linux driver
Severity: Warning
User Action:
1. Restart BMC via supported method and reboot the system.
2. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
3. If the problem persists, contact technical support.
• FQXPMUP0008K: Unable to obtain the installed version of windows driver
Severity: Warning
User Action:
1. Restart BMC via supported method and reboot the system.
2. Reflash BMC firmware.
3. Perform AC reset or virtual reseat.
Note: When performing AC reset, after powering off AC, wait several seconds before powering on
AC. After AC power is restored, power on the host system.
4. If the problem persists, contact technical support.
• FQXPMUP0101I: Start to update LXPM
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0102I: Start to update window driver
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0103I: Start to update linux driver
Severity: Info
User Action:
Information only; no action is required.
• FQXPMUP0104I: Start to update UEFI
174
ThinkSystem SE350 and ThinkSystem SE350 Enclosures Messages and Codes Reference