Playing A Tape; Automatic Tracking - RCA VR622HF User Manual

VCR BAsICS
STOP Stops the current VCR function such as record, playback,
rewind, or fast forward.
TRACKING Up or Down Lets you manually reduce the
streaks that may appear on the picture during play, slow, or
pause. Reduces picture "jitter" during play-pause.
TV•VCR Switches the picture signal so that it either comes
from the VCR or cable/antenna system.

Playing a Tape

1. Tune the TV to your VCR viewing channel
(3, 4, or TV's video input).
2. Insert a tape in the VCR.
POWER STOP • EJECT
CHANNEL
TRACKING
If the AUTO PLAY feature is set to ON, the tape
automatically begins playback (if the safety tab on the
cassette is removed).
• Press FWD or REV to position the tape.
• Press PLAY (if necessary) on the remote (PLAY•PAUSE on
VCR) to begin tape play.
• Press PAUSE (PLAY•PAUSE on VCR) for stop action.
• If necessary, press TRACKING up or down to remove any
streaks from the picture.
• Press STOP on the remote (STOP•EJECT on VCR) to stop
playback.
PLAY • PAUSE
TV • VCR REV FWD RECORD
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.

Automatic Tracking

The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking
is turned on whenever a tape is
inserted or the VCR's power is
turned on.
21