Hardware Overview - D-Link DIR-842 Quick Install Manual

Hardware Overview

1 Power LED
2 Internet LED
3 WPS LED
4
Wireless LED
5
LAN LEDs (1-4)
6 LAN Ports (1-4)
7 Internet Port
8
Power Port
9 Power Button
10 WPS Button
Reset Button
1 2 3 4
6
A solid green light indicates a proper connection to the power supply.
A solid green light indicates a connection to the Internet port.
A solid green light indicates a successful connection using WPS. The light
will blink during the WPS process.
A solid green light indicates the wireless function is working properly. This
light will blink during data transmission.
A solid green light indicates a connection to a device is working properly.
The LED will blink during data transmission.
Connect Ethernet devices such as computers, switches, and game consoles.
Connect a broadband modem to this port using an Ethernet cable.
Connect the supplied power adapter.
Press to power the router on and off.
Press to start the WPS process. The WPS LED will blink during the process.
The light will turn solid green when successfully connecting to a device.
Located on the bottom of the router. Using a paper clip, press and hold for
10 seconds to reset the router back to the factory default settings.
5
8
7 9 10
3