Table of Contents
Advertisement
RECORDING
Using Two VCRs for Copying and Editing
Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel (either 3, 4, or TV's
video input).
3. If you connected your VCR using the IN FROM ANTENNA and
OUT TO TELEVISION jacks, tune the recording VCR to channel
3 or 4--the one selected on the back of the playback VCR.
If you have connected your VCR using the audio/video jacks,
press INPUT on the recording VCR's remote to select the line
input. "L1" appears in the display.
4. Insert the tape you want to copy into the playback VCR.
Insert a blank tape with safety tab in place into the
recording VCR.
5. Press PLAY on the playback VCR to begin playback. When you
reach the point on the tape or program where you want to
begin copying, press PAUSE. You may need to adjust the
tracking.
6. Press the RECORD button, then press PAUSE on the
recording VCR.
7. Press the PAUSE buttons on both VCRs at the same time to
begin copying the tape.
8. To edit segments that you do not want to copy:
•
Press PAUSE on recording VCR to pause copying.
•
Locate the next segment you want to copy on playback VCR
by using FORWARD, REVERSE, and PLAY and then press
PAUSE.
•
Press PAUSE on both VCRs at the same time to resume
copying.
9. Press STOP on both VCRs when you are finished.
30
Caution
The unauthorized recording of
television programs or other
materials may infringe the rights
of others.
Two VCR Connection
CABLE BOX
IN
OR
ANTENNA
OUT
PLAYBACK VCR
MONO
L
L
VIDEO
R
R
IN
OUT
IN
OUT
AUDIO
MONO
L
L
VIDEO
R
R
IN
OUT
IN
OUT
AUDIO
RECORDING VCR
OR
TO TV
IN
FROM
ANTENNA
OUT
TO
CH
TELEVISION
3
4
OR
IN
FROM
ANTENNA
OUT
TO
CH
TELEVISION
3
4
TO TV
Advertisement
Table of Contents
