Table of Contents
Advertisement
OTHER FEATURES
1. Pr ess INFO twice on the remote to display the time counter.
2. Press CLEAR to reset the time counter to 0:00:00.
3. Pr ess FOR WARD to forward the tape until the time counter
reads 0:30:00.
4. Pr ess ST OP. This is the a pproximate end of the program.
(You may want to press PLA Y to verify.) No w, you can begin
recording at this spot.
5. Press INFO twice to remove the time counter from the screen
and return to the normal display mode.
ON-SCREEN DISPLAYS
The INFO button sho ws the status of the VCR (ST OP, PLA Y,
RECORD , etc .), channel number, time counter, date, time, and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1. Press INFO to see the on-screen displays. The time appears in
the display.
2. Press INFO again to have only the time counter remain on
the screen. The time counter will appear instead of the time
in the display.
3. Press INFO again to have no displays appear on the TV screen.
The time counter will r emain in the display. This is useful for
dubbing tapes.
4. Press INFO again to return to the normal display mode.
The time will appear in the display.
Turning off the VCR also r esets the displays.
0:30:00
Hours
Minutes
Seconds
1
Stop
CH 05
0:30:00
11/18/97 Tue 01:30PM SLP
Normal display
(times out)
2
0:30:00
Time counter only
(does not time out)
3
No displays will appear
(useful for dubbing tapes)
39
Advertisement
Table of Contents
