Place Channels In Vcr's Memory; Add Or Remove Channels From Vcr's Memory - RCA VR617HF User Manual

Setting Up the VCR
Startup
5. Place channels in the VCR's memory.
The first time you turn on the VCR or after a power
interruption, the VCR will display a message on the TV
screen prompting you to Auto-Search Channels for the
VCR. If the message does not appear, go to step A
below. If the message appears, follow the directions on
the screen.
Wait until the channel numbers stop changing. This
takes about one to two minutes. The TV will then tune
to the lowest channel found. Pressing CHAN up or
down will select only the active channels.
If you ever need to manually Auto-Search Channels
because you change cable or antenna signals:
6. Add or remove channels from the VCR's memory.
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do
not want to watch them.
Channels must be placed in memory using the Auto-
Search Channels feature described above before you can
add or remove channels.
8
A. Press MENU•PROG to display the VCR MAIN
MENU on the TV screen. If this menu does not
appear:
• Make sure TV is tuned to same channel as
5 6
CH 3 4 switch on the back of the VCR or the
TV's video input (refer to TV's manual).
• Press VCR1, then press MENU•PROG again.
• If you use a basic hookup, check VCR indicator
in display panel – it should be on. Press TV•VCR
to turn it on.
• Check the connections.
B. Press 4 to display the CHANNELS menu.
C. Press 1 to begin Auto-Search Channels.
The VCR automatically selects CABLE (cable TV) or
ANTENNA. If you need to change the setting
manually, press 3.
A. Press VCR1 on the remote.
B. Press MENU•PROG on the remote to see the VCR
MAIN MENU on the TV screen.
C. Press 4 to display the CHANNELS menu.
D. Press 2 to display the ADD/REMOVE CHANNEL
menu.
E. Follow the directions on the screen.
F. Add or remove more channels by entering channel
numbers or using CHANNEL up or down.
Auto-Search Channels
Connect antenna cable...
then press CH UP.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
CHANNELS
1 Auto-Search Channels
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 VCR Plus+ Channel List
5 Cable Box Setup
0 Exit
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
CHANNELS
1 Auto-Search Channels
2 Add/Remove Channels
ADD/REMOVE CHANNEL
CH 03
is presently ADDED
Press CLEAR to remove
Press MENU to exit