Select Cable Box Viewing Channel; Checking Or Clearing Timer Recordings; Timer Recording From The Vcr's Line Input - RCA VR617HF User Manual

Recording a Program
Recording While You're Away
Select Cable Box or Satellite Receiver Viewing Channel
Skip this setup if a cable box is not required for all channels.
1.
2.
3.
4.
5.
6.

Checking or Clearing Timer Recordings

1.
2.
3.
4.
5.

Timer Recording From the VCR's Line Input

30
Press MENU•PROG on the remote to display the VCR
MAIN MENU on the TV screen.
Press 4 to display CHANNELS menu.
Press 5 to display Cable Box Setup menu.
Press 1 when the Cable Box Setup menu appears.
Press two numbers on the remote to enter the output
channel of your cable box or satellite receiver. Press
0 before a single-digit number. (Valid numbers are
01 – 13.) Press CLEAR to correct an entry.
If you connected your cable box or satellite receiver
to the VCR using the cable box's AUDIO/VIDEO OUT
jacks, press INPUT to select VIDEO IN option.
Press MENU•PROG. A message appears which will
time out or press MENU•PROG to return to VCR
MAIN MENU.
VCR will now automatically enter the output channel
of your cable box or satellite receiver in the VCR
Plus+ or Timer Recording menu.
Press MENU•PROG on remote to display VCR
MAIN MENU on TV screen.
Press 2 to display the TIMER RECORDINGS menu.
Press 2 for Review Existing Progs. feature.
Press MENU•PROG to display information for the
next program.
Press CLEAR when the program you want to erase
appears on the screen.
The line input refers to the signal coming from the
AUDIO and VIDEO IN jacks of the VCR. Recording
from the line input is convenient if you have a satellite
receiver or similar component attached to these jacks.
To timer record from the component connected to the
VCR's line input:
Press INPUT to enter VIDEO IN instead of the channel
number on the TV screen during timer programming.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
CHANNELS
1 Auto-Search Channels
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
CABLE BOX SETUP
Is a cable box being
used with the VCR for
all channels?
1 YES
2 NO
CABLE BOX SETUP
Turn on the cable box
and tune it to ch 2.
Enter the output channel
of the cable box.
--
Press 01-13 or INPUT
Press MENU to exit
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
TIMER RECORDINGS
1 Create a New Program
2 Review Existing Progs.
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/95 SAT
Tape Speed SLP
Press CLEAR to delete
Press MENU for next prog
Program 1 (One Time)
Channel VIDEO IN
Start Time --:-- --
End Time --:--
Start Date --/--/--
Tape Speed SLP
Press CLEAR to correct
Press MENU to save