Axis M1043-W User Manual page 3

Hereby, Axis Communications AB declares that this product is
in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity may be obtained from
Axis Communications AB, Emdalavägen 14, SE-223 69 Lund.
Australia/New Zealand
This digital equipment fulfills the requirements of the Radio
Communications Standard AS/NZS 4771.
Korea
제품 사양
주파수: 802.11b/g/n(HT20), 2412~2472 MHz
온도: 0 ~ +40°C
전원: DC 5V, 1.5A
적합성 평가 표시
적합성 평가를 받은 자의 상호: AXIS COMMUNICATIONS AB.
기자재의 명칭 (모델명): 무선데이터통신시스템용 무선기기
(AXIS M1043-W, M1044-W)
제조연월: 별도 표시
제조자 / 제조국가: AXIS COMMUNICATIONS AB / Sweden
A/S 정보
Axis Communications AB 한국지사
주소: 서울특별시 금천구 가산동 685번지 가산 Digital Empire
1012호
TEL: 82-2-780-9636
FAX: 82-2-6280-9636
Japan
This product complies with Technical Regulations Conformity
Certification of Specified Radio Equipment.
Safety
This product complies to EN/IEC 60950-1, Safety of Information
Technology Equipment.
The power supply used with this product shall fulfill the requirements
for Safety Extra Low Voltage and Limited Power Source according to
EN/IEC/UL 60950-1.
Support
Should you require any technical assistance, please contact your Axis
reseller. If your questions cannot be answered immediately, your
reseller will forward your queries through the appropriate channels to
ensure a rapid response. If you are connected to the Internet, you can:
•
download user documentation and software updates
•
find answers to resolved problems in the FAQ database. Search
by product, category, or phrase
•
report problems to Axis support staff by logging in to your private
support area
•
chat with Axis support staff (selected countries only)
•
visit Axis Support at www.axis.com/techsup/
Learn More!
Visit Axis learning center www.axis.com/academy for useful trainings,
webinars, tutorials and guides.
Canada
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L'opération est soumise aux deux conditions suivantes:
(1) cet appareil ne peut causer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil.
Cet équipement est conforme aux limites IC exposition au rayonnement pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé avec distance minimum de 20cm entre l'utilisateur et l'élément rayonnant de l'appareil.
Remarque: le fabricant n'est pas responsable des interférences radio ou télévision causé par des modifications non
autorisées de cet équipement. Une telle modification pourrait annuler l'autorité de l 'utilisateur d'exploiter cet équipement.