Xiaomi MI Electric Scooter 4 Lite User Manual page 5

1 Handlebar 2 Buckle & Bell Lever
Stem
Brake Lever 5
4
Front Reflector
Quick Release Lever Lock 8
7
Wheel Motor
Charging Port
10 11
Control Panel & Power Button Scooter Bell
13 14
Hook
Rear Mudguard
16 17
Mechanical Brake
Side Reflector
19 20
22
Kickstand
Headlight
3
6 Quick Release Lever
9 Front Fork
Accelerator
12
Deck
15
Tail Light & Rear Reflector
18
Battery Compartment
21
Control Panel & Power Button
23
24
25
26
Speedometer: It displays the current speed when the scooter is working. When the scooter has an issue, it displays an error
23
code. When the scooter is charging, it displays the current battery level.
Bluetooth: When the icon lights up, it indicates the scooter has been successfully connected to the mobile device.
24
Temperature Warning: If the battery temperature is too high or too low, the thermometer icon will be on.
25
This will result in reduced acceleration and possibly charging issues. Use or charge the scooter after its
battery temperature returns to the normal operating range.
Error Notification: When the wrench icon displays red, it indicates that the scooter has an error.
26
Power Button: Press the button to turn the scooter on, and hold the button for 2 to 3 seconds to turn the scooter off.
27
When the scooter is on, press the button to turn on/off the headlight and tail light, and press twice to cycle through
the modes.
Note: The scooter will turn off automatically when it enters standby mode for more than 10 minutes. The standby
mode means that the scooter is not being charged or not locked when it is on and not running.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
28
Inflation: When the inflation icon is on, it means that it is time to maintain the tires. Check the tire pressure and inflate the
29
tires immediately to avoid tire damage caused by inadequate tire pressure. The recommended tire pressure is 50 psi.
Note: After performing maintenance, follow the instructions in the app to disable the inflation reminder.
Lock: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi Home/Xiaomi
30
Home app.
Modes: is for walking mode, and its maximum speed is 6 km/h; the taillight will blink red when this mode is enabled. D is
31
for standard mode. S is for sport mode, and it has high speed in this mode; it is recommended to use this mode after
mastering the riding skills.
31
30
29
28
27