Assembly and Set-up
Put down the kickstand, and hold up the stem until it is completely in an upright position. Then push the quick release
1
lever inward to the end.
Headlight Facing Forward
2
Install the handlebar onto the stem, and make sure to install the handlebar in the correct direction.
Follow the number order as illustrated to pre-tighten the four screws with the included Allen key. Make sure the handlebar
3
is correctly installed and then tighten the screws thoroughly.
Charge Your Scooter
1
Lift up the rubber flap.
Disconnect the battery charger from the
3
charging port when charging is completed.
2
Connect the battery charger to the charging port.
4
Put back the rubber flap.