Setting & Operation Requirement; Ncco Technology - Westinghouse WH10P Operation Manual

Setting & Operation Requirement
■ Please pull out the power plug at the hand plug position. (Otherwise, the
power line may be damaged, resulting in fire or electric shock.)
■It is prohibited to disassemble battery.
There are protection mechanisms and protection circuits inside the battery to protect the
user. Any improper dismantling will damage the protection mechanisms and possibly
cause the battery to get heated, generate smoke and fire.
■It is prohibited to heat or burn the battery.
This may cause the melting of the battery insulator with the loss of its safety function and
burn the electrolyte within. High temperatures might cause the battery to overheat,
distort the case and lead to smoke and possibly fire.
■It is prohibited to wet the unit.
The unit is installed with an internal battery. Wetting the unit or placing it into water
may cause the loss of functionality of the battery protective circuits. This could lead to an
abnormal chemical reaction leading to possible heating of the battery, giving off smoke and
start a fire.
■Please avoid charging or operating the unit near a source of fire or under
direct strong sunlight.
Do not charge or operate the unit near the source of a fire or oven, or in an environment
of excessive high temperatures. Overheating could ensue causing functionality loss, short
circuit of the battery together with an abnormal chemical reaction. This could overheat
the battery leading to smoke and possibly fire.
LITHIUM BATTERY SAFETY PRECAUTION
■If one observes an undesirable odour from the installed battery, or from other areas
within the unit on first-time operation, please do not operate and return to the distributor.
■Please keep the unit away from an environment involving a heat source, a high
barometric pressure or an increasing pressure on the surface of unit during its operation.
Place the unit in a secure and safe operating location and away from children.
■Avoid the unit being shaken in a serious vibrating environment.
■Please avoid storing or operating the unit in a strong sunlit and hot environment. This will
prevent the battery from overheating, becoming distorted, smoking or shortening its life.
■Please avoid operating the unit in an environment which might conduct static electricity
and induce the battery to overheat, distort, generate smoke or shorten its life.
■Please only charge the battery with the dedicated charger and follow the recommended
charging method.
■Insert battery in correct polarities. It is prohibited to arbitrarily disassemble or refit
unit and battery. For safety concern, do not place unit at a wet location.
■To keep the battery at half-charged condition without any damage and place in the unit a
cool dry location when stored for a long period of time.
■Do not put unit into fire or water.
��
PRECAUTION
WARNING
WARNING

NCCO Technology

Patented NCCO Air Purification Technology Brings Fresh and Clean Air
Patented NCCO（Nano Confined Catalytic Oxidation）Air Purification Technology
is invented by Member of HKUST Entrepreneurship Program, and has obtained
global patents. Our technology can solve indoor air quality problems in an
all-round way, create a home / office environment with fresh air, and protect you
and your family's health.
NCCO Technology's Characteristics
◆ Patented NCCO Technology continuously removes bacteria and viruses efficiently.
◆ Patented NCCO Technology effectively decomposes carcinogens in the air, such as formaldehyde.
◆ Hazardous pollutants will be decomposed into harmless water molecule and carbon dioxide, and
will not accumulate in the filter, effectively avoiding re-release into the air due to saturation, and
will not cause secondary pollution.
◆ Under normal maintenance conditions, NCCO Reactor can be used for a long time. Since there is no
need to replace NCCO Reactor frequently, the operating cost is much lower than similar products on
the market.
◆ Effectively remove offensive odour.
◆ Patented NCCO Technology has been widely used in different industries, such as schools, hospitals,
nursing centers and public toilets.
About Intelligent Power-Off Protection System
b-MOLA NCCO Air Treatment Unit is designed using an Intelligent Power-Off Protection System. The unit will intelligently
power off after continuous use over a period of 8 hours and then will restart automatically after 30 minutes downtime once
connected to an external power supply. The unit will use the intelligent system to power-off after continuous use of 2 hours,
and then will restart automatically after 10 minutes of downtime when using its internal (battery) power supply. Our intelligent
power-off system is able to effectively avoid excessive load and eliminate any risk during the supply of power.
Placing Area Guideline
■ Indoors
As dust falls on the floor, it is recommended to place the unit on a flat surface in the room.
■ Excellent Air Circulation
Placing the unit on a dry, solid, level surface, and ensure the unit is provided with reasonable space
of at least �� cm from any objects, in order to operate effectively.
■ Do not put the unit in the following places:
·In the direct sunlight; blown by air conditioner; high
temperature
area. (Otherwise, it may cause deformation, aging, discoloration
or reduction of service life.)
·Distance over � meter to objects such as televisions and
radios.
(Otherwise, it may lead to image disorders and lost of sound.)
■ Do not place objects at air inlet and outlet.
(Otherwise, it may affect the operating performance.)
Basic Information
■ Do not use the same power outlet with TV,
radio and other equipment.
(Otherwise, it may lead to image disorders
and lost of sound.)
→Please plug into other power outlets.
■ Do not place any items on top of the unit.
(Otherwise, the unit may be malfunctioned.)
��