Medisana AD 620 Operating Instructions Manual page 13

Hide thumbs Also See for AD 620:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
Functions
The aroma diffuser is a modern fragrance diffuser which uses ultrasound technology to generate a
fine mist and thus distribute the fragrance throughout the whole room. The aroma diffuser has the
following additional functions:
■ Timer: The timer can be used to switch off the diffusion of the fragrance after a selected period.
■ LED:
LEDs are integrated into the aroma diffuser which either light up in the selected colour or
change colour automatically.
Operating buttons
The aroma diffuser is controlled using two operating buttons.
Button
Function
Timer button:
This button can be used to set the timer for automatic deactivation of the device.
The following settings are available:
2 hours → 4 hours → timer off
Switching on/off and the LED button:
This button can be used to switch the aroma diffuser on and off. You can only switch
on when the water tank is correctly filled.
In addition, the button can be used to define the colour of the LED lighting.
The following settings are available:
Device on → automatic colour change → single colour→ LED off→ device off
Cleaning and servicing
■ Before cleaning, pull the mains plug.
■ Empty the device after each use and dry the water tank with a cloth.
■ Wash the water tank with clear water when you wish to change the aroma. This prevents mixing
different aromas.
■ Only clean the outside of the device with a soft, slightly damp cloth. Then rub it dry with a soft, dry
cloth.
■ Do not under any circumstances us brushes, sharp cleaning implements, benzene, thinners or
alcohol.
Descaling
Descale the device after five or six uses or every 14 days. To do so, proceed as follows:
1. Disconnect the device from the power supply.
2. Fill the water tank with a maximum of 300 ml of water and add three tablespoonfuls of citric acid.
3. Allow the liquid to take effect for at least fifteen minutes.
4. Empty out the liquid.
5. Wipe out the water tank with a dry cloth.
However, if you have any questions, please contact our service department. The service department
address is included on the separate supplementary sheet.
Art. 60082
For use
GB
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

60082

Table of Contents