BorMann PRO BAG1300 Manual page 7

EN
Trigger type On/Off Switch (*not included in all models)
Adjustable main handle (not included in all models)
Adjust the position of the main handle by pressing the button found next to the trigger and rotate the handle clockwise or
anticlockwise in order to set it to the desired position.
Speed Adjustment Selector
Turn the thumb-wheel clockwise to increase or anticlockwise to decrease the maximal rotational speed of the drive spindle
and cutting/ grinding disk.
For models including a soft start system, you will notice that the disk's rotational speed increases gradually.
This is part of the normal operation of the tools and must not worry you.
Disposal
The power tool, accessories and packaging should be sorted for environmental-friendly recycling.
Only for EU countries:
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must be collected separately and
disposed of in an environmentally correct manner.
7
Handle Adjustment
Button
WWW.NIKOLAOUTOOLS.GR
Safety button
On/Off Trigger Switch
For grinders equipped with a trigger type On/Off switch:
To turn the grinder on press trigger's safety button and the
trigger at the same time and then release them to turn the
grinder off.