Safety Information - RCA DRD223RD User Manual

Rca drd223rd: users guide
Table of Contents

Advertisement

Safety Information

WARNING
To reduce risk of fire or
shock hazard, do not
expose this receiver to
rain or moisture.
Cautions
Note to Cable TV Installer:
Note to Satellite Dish Installer:
IMPORTANT NOTICE:
Care and Cleaning:
Product Registration
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the receiver.
Model No.
____________________________________________________
Serial No.
____________________________________________________
Purchase Date:
Dealer/Address/Phone: ___________________________________________________________________________________
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates
important instructions
accompanying the product.
Do not stack electronic components or other objects on top of the
Receiver. The slots on top of the receiver must be left uncovered to allow
proper airflow to the unit. Blocking the airflow to the unit could impair
performance or damage your receiver and other components.
Do not stack the receiver on top of a "hot component" such as an audio
power amplifier.
FCC Regulations state that unauthorized changes or modifications to this
equipment may void the user's authority to operate it.
Your system may be equipped with an RF remote control. The RF remote
control complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) The RF remote may not cause harmful interfer-
ence and; 2) The RF remote must accept any interference recieved, including
interference that may cause undesired operation.
This reminder is provided to call your attention to Article 820-40 of the
National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1)
which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the
building as close to the point of cable entry as practical.
This reminder is provided to call your attention to Article 810, and in
particular Article 810-15, of the National Electrical Code (which covers
proper installation and grounding of television receiving equipment) as well
as to Article 820-40, which specifies that the satellite dish cable ground shall
be connected to the grounding system of the building as close to the point
of cable entry as practical.
This device incorporates an anticopy process technology that is protected by
U.S. patents and other intellectual property rights measures. The anticopy
process is licensed for non-commercial, home use only. Reverse engineering
or disassembly is prohibited.
Use a soft cloth or the dusting attachment of your vacuum cleaner to dust
your receiver. Remove dust from both top and bottom ventilation holes.
Plastic surfaces are easily scratched and can be marred by alcohol and
various solvents. Avoid excessive use of oil-based furniture polishes since the
materials used in the cabinet will accumulate more dust. A non-abrasive,
________________________________________________
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drd225rd

Table of Contents