Safety Information - RCA DRD505RB User Manual

Safety Information

WARNING
To reduce risk of fire or
shock hazard, do not
expose this receiver to
rain or moisture.
Cautions
Note to Cable TV Installer:
Note to Satellite Dish Installer:
IMPORTANT NOTICE:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
WARNING
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates
"dangerous voltage" inside the
product that presents a risk of
electric shock or personal injury.
Do not stack electronic components or other objects on top of
the DSS ® Receiver. The slots on top of the receiver must be left
uncovered to allow proper airflow to the unit. Blocking the airflow to
the unit could impair performance or damage your receiver and other
components.
Do not stack the DSS
audio power amplifier.
FCC Regulations state that unauthorized changes or modifications to
this equipment may void the user's authority to operate it.
The RF remote control complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1) The RF remote
control may not cause harmful interference and; 2) The RF remote
control must accept any interference received, including interference
that may cause undesired operation.
This reminder is provided to call your attention to Article 820-40 of the
National Electrical Code (Section 54 of the Canadian Electrical Code,
Part 1) which provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as
practical.
This reminder is provided to call your attention to Article 810 and in
particular article 810-15 of the National Electrical Code which covers
proper installation and grounding of television receiving equipment as
well as to article 820-40 of the National Electrical Code which specifies
that the satellite dish cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as
practical.
This device incorporates an anticopy process technology that is
protected by U.S. patents and other intellectual property rights. The
anticopy process is licensed for non-commerical, home use only. Reverse
engineering or disassembly is prohibited.
This symbol indicates
important instructions
accompanying the product.
® receiver on top of a "hot component" such as an