Safety Information - RCA DRD420RE User Manual

Safety Information

WARNING
To reduce the risk of fire
or electric shock, do not
expose this product to
rain or moisture.
Cautions
Note to Cable TV Installer:
Note to Satellite Dish Installer:
IMPORTANT NOTICE:
Care and Cleaning:
Product Registration
Please fill out the product registration card and return it immediately. Returning the card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model
numbers in case you need them. The numbers are located on the back of the product.
Model No. _________________________________________________________
Serial No. _________________________________________________________
Purchase Date: ________________________________________________
___________________________________________________________________________________
Dealer/Address/Phone:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
WARNING
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
RISK OF ELECTRIC SHOCK
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DO NOT OPEN
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.
Do not stack electronic components or other objects on top of the
Digital Satellite Receiver. The slots on top of the receiver must be left uncov-
ered to allow proper airflow to the unit. Blocking the airflow to the unit could
impair performance or damage your receiver and other components.
Do not stack the digital satellite receiver on top of a "hot component" such as an
audio power amplifier.
FCC Regulations state that unauthorized changes or modifications to this equip-
ment may void the user's authority to operate it.
This reminder is provided to call your attention to article 820-40 of the National
Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building as close to
the point of cable entry as practical.
This reminder is provided to call your attention to articles 810 and 820 of the
1999 National Electrical Code. Refer to article 810, in particular to 810-1 and
810-15, for required grounding of the metal structure of the Dish Antenna.
Refer also to the 810-2 which, by reference to article 820, requires that the
satellite dish coaxial cable shield be connected to the grounding system of
the building as close to the point of cable entry as practical.
This device incorporates an anticopy process technology that is protected by
U.S. patents and other intellectual property rights. The anticopy process is
licensed for non-commercial, home use only. Reverse engineering or
disassembly is prohibited.
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
digital satellite receiver. Remove dust from the ventilation holes on the top
and bottom.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the
materials used in the cabinet will accumulate more dust. A non-abrasive,
anti-static cleaner/polisher is recommended.
This symbol indicates important
instructions accompanying the
product.