Basic Connection - RCA DRD221RD User Manual

Setup and Connections

Basic Connection

DIGITAL
SATELLITE
RECEIVER
SATELLITE IN
VCR
IN FROM ANT
CH3
CH4
OUT TO TV
TV
IN
SATELLITE
DISH ANTENNA
IN
OUT
FROM
TO
ANT
TV
How to View Your Components
To watch programming received via satellite
with this connection, tune the TV to either
channel 3 or 4. (The default is channel 3. You
may change the output channel to 4 by
CABLE OR
choosing Options from the Main menu, then
OFF-AIR ANTENNA
selecting System Options,thenOutput
Channel.)
To record programming, tune the digital
satellite receiver to the desired channel and
set your VCR to record on channel 3 or 4.
To view VCR recordings, tune the TV to the
VCR output channel (usually CH 3 or 4) and set
your VCR to play. If your VCR is a brand other
than RCA, GE, or PROSCAN, you may need to
program the remote to control the VCR. See
the next section, "Programming the Remote."
CAUTION
Do not stack electronic components or
other objects on top of the digital satellite
receiver. See "Safety Information" inside
the front cover.
7