Table of Contents
Advertisement
The Menu System
Keep track of devices by assigning a label.
4.
Use the arrow buttons and OK to select the house and module
codes that match the device's remote control module and label the
module. Select Save Setup to complete the setup.
Device Control
Once the device is set up, there are three ways to control it: with the
menu system, with a timer, or with the remote control.
If you use the menu to control the device:
Select a device from the Home Control menu screen. You can then turn
it on, turn it off, or adjust the brightness for lamp modules.
Select Edit Setup to change a device.
Control the device from the menu.
If you use a timer to control a device:
1.
Select Set Timer.
2.
Schedule a timer by completing the on-screen sentence.
Complete the on-screen sentence to schedule a
timer.
On-screen icons are an easy way to
understand the timers:
Indicates that the timer is set.
Indicates that the timer is suspended.
You can schedule several timers to control
the same device at different times.
51
Advertisement
Table of Contents
