Setting Options; Setting The Electronic Delay Time; Starting The Wash Cycle; Interrupting The Wash Cycle - Bosch SGV78B53UC Use And Care Manual

a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
13.4 Setting options
You can set options to complete
the chosen wash program.
Note: The available options de-
pend on which program is se-
lected.
Press the button for the rele-
▶
vant option.
a The option is set and the option
button flashes.
13.5 Setting the electronic
delay time
You can delay the start of the
wash cycle by up to 24 hours.
Press ⁠ .
1.
a "h:01" appears on the display.
Use to set the required
2.
start time for the wash cycle.
Press ⁠ .
3.
a This activates the electronic de-
lay time.
Tip: To deactivate the electronic
delay time, press
until "h:00" appears on the dis-
play.
13.6 Starting the wash
cycle
Press .
▶
a The wash cycle has ended
when the display shows
"0h:00m".
Notes
¡ If you want to add more dish-
ware while the appliance is run-
ning, do not use the collecting
tray as a handle for the upper
rack. You might touch the par-
tially dissolved tablet.
repeatedly
a The cycle is cancelled and
Basic Operation en-us
¡ You can only change a cycle in
progress if you can cancel it
first.
→ "Terminating the wash cy-
cle", Page 31
¡ To save energy, the appliance
switches off automatically
10 minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
13.7 Interrupting the wash
cycle
Press On/Off.
1.
The program is saved and the
appliance switches off.
Press On/Off.
2.
Press to resume the wash
3.
cycle.
13.8 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
ends after approx. 1 minute.
for approx.
31