en-us Basic Operation
Additional loading patterns for 10
place settings:
Lower rack
Upper rack
Third rack
30
13 Basic Operation
Basic Operation
Basic Operation
13.1 Protection against
unintentional
operation
Your appliance is equipped with a
function that helps to prevent un-
intentional operation, e.g. by chil-
dren. After starting the appliance,
the door has to be closed within 4
seconds, otherwise the operation
will be paused.
Note: This function cannot be de-
activated.
Requirements
¡ Pressing Start to begin a wash
cycle
¡ Setting Delay time and press-
ing Start
¡ Opening the door while Delay
time is active
¡ Opening the door during a
wash cycle.
Press
.
1.
Close the door.
2.
a The wash cycle will resume.
13.2 Switching on the
appliance
Press
▶
The program last selected and
the additional function last se-
lected will be set by default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
13.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable programme.
Press the right cycle button.
▶
.