Loading Dishware - Bosch SGV78B53UC Use And Care Manual

en-us Dishware
Cause
Highly caustic
alkaline or
highly acidic
cleaning solu-
tions, in partic-
ular commer-
cial or industrial
cleaners, are
not safe to use
in the dish-
washer with
aluminum.
The water tem-
perature of the
cycle is too
high.
The water tem-
perature of the
cycle is too
high and the
water is too
soft.
12.2 Loading dishware
Arrange dishware correctly to opti-
mize the dishwashing result and
prevent damage to both dishware
28
Recommenda-
tion
If you use
highly caustic
alkaline or
highly acidic
cleaning solu-
tions, in partic-
ular commer-
cial or industrial
cleaners, do
not put any-
thing aluminum
in the dish-
washer.
Select a cycle
with lower tem-
peratures.
After the cycle
has ended,
take glassware
and silverware
out of the appli-
ance without
delay.
Select a cycle
with lower tem-
peratures.
Use detergent
with glass pro-
tection.
Adjust the wa-
ter hardness
setting on your
dishwasher.
→ "Setting the
water softening
system",
Page 22
and the appliance. The noise level
may also vary depending on the
items placed in your dishwasher.
NOTICE:
Avoid dishwasher damage
Do not load the dishwasher
▶
with paper products, plastic
bags, packing materials or any-
thing other than normal, dish-
washer safe dishware and
kitchenware.
Tips
¡ Using the appliance allows you
to save energy and water com-
pared to doing dishes by hand.
¡ See our website for examples
of how to load your appliance
efficiently.
¡ To save energy and water, load
the machine with the number of
place settings specified (stan-
dard load with dishes and sil-
verware).
¡ For better washing and drying
results, position items with
curves or recesses at an angle
so water can run off.
Remove large remnants of food
1.
from dishware.
To save resources, do not pre-
rinse dishware under running
water.
Observe the following when ar-
2.
ranging dishware: