Basic Operation; Protection Against Unintentional Operation; Switching On The Appliance; Setting A Cycle - Bosch SPX68C75UC Use And Care Manual

12 Basic Operation

Basic Operation

Basic Operation
12.1 Protection against
unintentional
operation
Your dishwasher has a built in
feature to help prevent uninten-
tional operation, e.g. by children.
After starting the appliance, the
door has to be closed within 4
seconds, otherwise the operation
will be paused. If this occurs, fol-
low the steps below to restart your
dishwasher.
For top button controls: Press
1.
and close the door.
For front button controls: Close
2.
the door and press
a The wash cycle will resume.
Notes
¡ Unintentional operation is
activated when:
– Pressing Start to begin a
wash cycle
– Setting Delay time and
pressing Start
– Opening the door while De-
lay time is active
– Opening the door during a
wash cycle.
¡ This feature cannot be deacti-
vated.
12.2 Switching on the
Press
▶
The standard program is set by
default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
12.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable program.
Press the right cycle button.
▶
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
12.4 Setting options
You can set options to complete
the chosen wash program.
Note: The available options de-
pend on which program is se-
lected.
Press the button for the rele-
▶
vant option.
a The option is set and the option
⁠ .
button flashes.
12.5 Setting the electronic
You can delay the start of the
wash cycle by up to 24 hours.
Press
1.
a "h:01" appears on the display.
Use
2.
start time for the wash cycle.
Press
3.
a This activates the electronic de-
lay time.
Basic Operation en-us
appliance
⁠ .
delay time
⁠ .
to set the required
⁠ .
29