Steps
The component you are left with is the palmrest.
NOTE:
The palmrest assembly cannot be further disassembled once all of the pre-removal parts procedures are
completed. If the touchpad frame, touchpad support bracket, touchpad mylar, touchpad module, touchpad cable,
conductive tape or thermal pad are malfunctioning and need to be replaced, replace the entire palm-rest assembly.
Next steps
1. Install the
system
board.
2. Install the
display
assembly.
3. Install the
IO
board.
4. Install the keyboard.
5. Install the speakers.
6. Install the battery.
7. Install the
base
cover.
8. Follow the procedure in
72
Removing and Installing
after working inside your
computer.