Before You Begin - RCA RP5012 User Manual

Before you begin

Power supply
This unit can be operated by 2 AAA
batteries or 3V DC power supply.
Installing Batteries
(not included)
1. Slide the battery compartment door
to the bottom and lift up the door to
open.
2. Insert 2 AAA batteries with
polarities matching indications.
3. Replace the battery compartment
door.
Refer to the battery
level indicator on
display for batteries
level. Replace with new
batteries when the
indicator is empty.
Using AC/DC adaptor
(not included)
1. Connect the AC/DC adaptor to the
DC jack on the unit.
2. Connect the AC/DC adaptor to the
wall outlet.
Auto power shut
down
The unit will be automatically turned
off if left idle for 3 minutes.
RP5010
Using headphones and
external microphone
• When headphones are connected,
sound output from speaker will be
muted.
• When external microphone is
connected, no record can be made
from built-in microphone.
Keys lock
This feature avoids accidental key
activation during recording or
playback.
1. Press and hold MENU button for 2
seconds, LOCKED will be shown on
display. (LOCK icon
2. Press and hold MENU button for 2
seconds again to unlock keys.
Tips: keys lock function can be Tips Tips Tips Tips
activated in any mode.
Tones
You can activate this feature so that
beep sound can be heard whenever you
press on any button except during
playback and recording.
1. Press MENU button
repeatedly until TONE
shows on display.
2. Press REVERSE or
FORWARD to set beep
sound ON/ OFF.
3. Press MENU to
confirm selection.
8
EN
will lit)
6
8/9/02, 6:00 PM