Table of Contents
Advertisement
Quick Links
AR0220AT-iBGA87-GEVB
AR0220AT-iBGA87
Evaluation Board
User's Manual
Evaluation Board Overview
The evaluation boards are designed to demonstrate the features of
ON Semiconductor's image sensors products. This headboard is
intended to plug directly into the Demo3 system. Test points and
jumpers on the board provide access to the clock, I/Os and other
miscellaneous signals.
Features
•
Clock Input
Default – 27 MHz Crystal Oscillator
♦
Optional Demo3 Controlled MClk
♦
•
Two-wire Serial Interface
Selectable Base Address
♦
•
4 lane MIPI/HiSPi (High Speed Serial Pixel) Interface
•
ROHS Compliant
Block Diagram
© Semiconductor Components Industries, LLC, 2017
November, 2017 − Rev. 0
Figure 2. Block Diagram of AR0220AT Evaluation Board
EVAL BOARD USER'S MANUAL
Figure 1. AR0220AT Evaluation Board
1
www.onsemi.com
Publication Order Number:
EVBUM2523/D
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ON Semiconductor AR0220AT-iBGA87-GEVB
Summary of Contents for ON Semiconductor AR0220AT-iBGA87-GEVB
- Page 1 The evaluation boards are designed to demonstrate the features of EVAL BOARD USER’S MANUAL ON Semiconductor’s image sensors products. This headboard is intended to plug directly into the Demo3 system. Test points and jumpers on the board provide access to the clock, I/Os and other miscellaneous signals.
- Page 2 AR0220AT−iBGA87−GEVB Top View Reset Switch SW1 TEST P42 CLK Sel P20 GPIO0/FLASH P7 I/O Voltage Sel P16 GPIO3/TRIGGER P50 VDDIO−PHY Voltage Sel P48 GPIO2 P9 GPIO1 P13 SADDR0 P40 SADDR1 P41 VPP0 P3 SADDR21 P43 ATEST2 P45 MULTICAM SLAVE CONN MULTICAM MASTER CONN P26 ATEST3 P46...
- Page 3 AR0220AT−iBGA87−GEVB Jumper Pin Locations Pin 1 on the leftmost side of the pin in Figure 5 and The jumpers on headboards start with Pin 1 on the leftmost bottommost in Figure 6. Grouped jumpers increase in pin side of the pin. Grouped jumpers increase in pin size with size with each jumper added as shown in Figure 7 and each jumper added.
- Page 4 AR0220AT−iBGA87−GEVB Jumper/Header Functions & Default Positions Table 1. JUMPERS AND HEADERS Jumper/Header No. Jumper/Header Name Pins Description Open OTPM Programming Voltage Not Supplied GPIO0/FLASH +5V0 FLASH +3V3 GPIO2 2−3 (Default) Normal Operation. /Master Mode 1−2 GPIO2 Pull Up Open Multi-Camera Slave Mode GPIO1 2−3 (Default) Normal Operation.
- Page 5 X50/x51 X60/x61 X70/x71 Interfacing to ON Semiconductor Demo3 Baseboard Table 3. SHORTENED JUMPERS FOR POWER The ON Semiconductor Demo3 baseboard has a similar MEASUREMENT 52-pin connector P5 which mates with J1 of the headboard. Jumper Voltage The four mounting holes secure the baseboard and the JP1 (From Demo3) 5.0 V...
- Page 6 onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf.
Need help?
Do you have a question about the AR0220AT-iBGA87-GEVB and is the answer not in the manual?
Questions and answers