Important Safety Instructions - Brother MFC-J6710DW Instructions Manual

IMPORTANT
• Disruption of power can wipe out information in the machine's memory.
• DO NOT put objects on top of the machine.
• DO NOT place anything in front of the machine that will block received faxes. DO NOT place
anything in the path of received faxes.
• If the machine does not operate normally when the operating instructions are followed, adjust
only those controls that are covered by the operating instructions. Improper adjustment of other
controls may result in damage or minor exposure to electromagnetic waves and will often
require extensive work by a qualified technician to restore the machine to normal operation.
• A distinct change in the machine's performance may, indicate a need for service.
• The power cord, including extensions, should be no longer than 16.5 feet (5 meters).
DO NOT connect your machine to an AC power outlet on the same circuit as large appliances
or other equipment that requires a significant amount of electricity to operate. Doing this may
cause an overvoltage, tripping your circuit breaker or blowing your fuse. If you cannot avoid
using the machine with these appliances, we recommend that you use a voltage transformer
or a high-frequency noise filter. Use a voltage regulator if the power source is not stable.
• Lightning and power surges can damage this machine. We recommend that you use a quality
surge protection device on the AC power line and any telephone (RJ-11) or Ethernet (RJ-45)
cable plugged into the machine, or that you unplug the cords during a lightning storm.

Important safety instructions

1 DO NOT attempt to service this machine yourself because opening or removing covers may
expose you to dangerous voltage points and other risks and may void your warranty. Refer all
servicing to a Brother Authorized Service Center. For the location of your nearest Brother
Authorized Service Center, please call:
In USA: 1-877-BROTHER (1-877-276-8437)
In Canada: 1-877-BROTHER
2 Unplug this machine from the power outlet and refer all servicing to Brother Authorized Service
Personnel under the following conditions:
 When the power cord is damaged or frayed.
 If liquid has been spilled into the machine.
 If the machine has been exposed to rain or water.
8
1