Installation - Wamsler WO 109- 6F/A User Instruction

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25

1.2 Installation

Fuels
The equipment can be used with fuels detailed in the followings. This way the "low-
smoke" and trouble-free operation can be secured. Use only dry wood with moisture
of maximum 20% and lignite briquette.
Filling quantities 6 kW
- Split billet: max. Length: 33 cm
max. two billets per filling, appr. 1.4 kg
- Lignite briquette: max. 1.7 kg
Adjustment of the burning air:
Fuel
Warming up, kindling
Nominal heating
Wood
Brown-
Nominal heating
coal
Putting out of working
order
Device control with the automatic control
When igniting the air control to "hand" and level "2". After about an hour, the air
controller on "automatic", level 5-6. Then you can with the "automatic control"
the desired temperature.
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with
preventive chemicals, furthermore paper and cardboard. For kindling please use
wood scrapings or grill starter but never use liquid auxiliaries!
The first kindling
At the first fire set-up could be a little smoke, but is not dangerous, normal!
In this time, please ventilate the room carefully!
Types of fuels
Hard wood
Soft wood
Brown-coal
performance
performance
Heating value
appr. kJ/kg
19.500
14.600
11.500
Filling quantities 8 kW
- Split billet: max. Length: 33 cm
max. two billets per filling, appr. 2.0 kg
- Lignite briquette: max. 2.2 kg
primary air
secondary air
regulator
door down
(when existent)
2 - 4
2
2,5
0
Table 1
28
Setting of the
regulator
fuel selector
door up
2
2
2
0
backside
H
H
K
K

Advertisement

Table of Contents
loading

Table of Contents