Logger Locus Tm - GNS 601 Manual

GNS 601 StarterKit
4.4.6 Logger LOCUS
GNS601 provides an autonomous logger function that automatically stores position information in
an internal 128kB flash memory. A complete tracking unit can be realized without any external CPU
or memory. The following parameter can be set to optimize logging time:
Type: logging type - Overlap, FullStop.
Interval: Logging based upon interval setting (valid when Interval mode selected).
Distance: Logging distance setting (valid when Distance mode selected).
Speed: Logging speed setting (valid when Speed mode selected).
Status: Logging status – Stop logging, Start logging.
Number: Logging number of data record. Progress bar is shown logging used percentage.
Supported Modes:
AlwaysLocate TM mode: Logging with AlwaysLocate
Fix only mode: Logging when 3D-fix only.
Normal mode: Logging per positioning (ex. 1 second).
Interval mode: Logging per interval (ex. 15 seconds).
Distance mode: Logging by distance (ex. 75 meters).
Speed mode: Logging mode by speed (ex. 15 m/s).
GPS Viewer software only provides storing "basic" content informations: UTC time, fix type, Lat, Lon,
Height and Checksum (16 Bytes) and supports fix only mode + interval mode, no other options are
selectable for this LOCUS logger demonstration application.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from
TM
confidential information
TM
.
manual
manual
18
© GNS-GmbH 2013
V 0.10, Mar. 8th 2013