GNS 601 StarterKit
View Menu "Advanced Functions"
4.4
The GPS viewer software provides additionally test functions by pressing "Ctrl+Alt+S" keys at the same
time. New tabs will be displayed.
Using the arrow buttons on right side more functions can be selected.
4.4.1 Standby Mode
The standby mode is one of the power saving modes of the GNS601. Entering the standby mode by
clicking on the "Set Standby Mode" button, the graph begins to display the on/off power states.
In standby mode the GNS601 starter kit "fix indicator" is constantly off. The corresponding PMTK
command is reported in green letters. Referring to the CommandInterface manual document more
details on the command can be consulted.
4.4.2 Periodic Mode
The periodic mode enables the GNS601 to enter and exit the deep sleep mode, in order to achieve
maximum power saving.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Arrow.com.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
manual
confidential information
© GNS-GmbH 2013
V 0.10, Mar. 8th 2013
manual
15