Samsung 5+ Series User Manual page 9

7
Auto Tuning (2):
(Depending on the
country) Selecting a
search options
8
Clock: Setting the
Clock Mode
9
Time Zone
(Depending on the
country): Setting the
your Time Zone
10
Setup Complete
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
You should do Setup (Menu → System) again at home although you did in shop.
If you forget the PIN code, press the remote control buttons in the following sequence in Standby
✎
mode, which resets the PIN to "0-0-0-0":
Select the channel source to memorise. When setting the aerial source to
Cable, a step appears allowing you to assign numerical values (channel
frequencies) to the channels. For more information, refer to Auto Tuning
(Channel Menu → Memorizing Channels) in the e-Manual.
Select Stop at any time to interrupt the memorization process.
✎
Some channel may not be transmitted to this television. It depends
✎
on Broadcasting signal gain or specification.
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
This step is only available when the clock mode is set to Auto.
• Auto: Set the time zone automatically.
• Manual: Set the time zone manually.
If you selected Manual, you can select whether to turn DST
✎
(Daylight Savings Time) On or Off. (Depending on the country)
Select Close to finish.
The completed settings are displayed.
✎
→ 8 → 2 → 4 →
MUTE
English - 9
(on).
POWER