Bosch WEU PLR 40 C Instructions Manual page 24

OBJ_BUCH-2312-004.book Page 24 Tuesday, November 8, 2016 4:12 PM
24 | English
* depending on surface characteristics and ambient conditions
A) For measurements from the rear measuring-tool edge. The working range increases depending
on how well the laser light is reflected from the surface of the target (scattered, not reflective) and
the brighter the laser point is to the ambient light intensity (interior spaces, twilight). For distances
of less than 20 m a retro-reflective target plate should not be used, as it can lead to measurement
errors.
B) For measurements from the rear measuring-tool edge, 100 % reflectance of the target (e.g., a
white-painted wall), weak backlight and 25 °C operating temperature. Additionally, a deviation in-
fluence of ±0.05 mm/m must be taken into account.
C) At 25 °C operating temperature
D) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
E) Bluetooth® deactivated
The measuring tool can be clearly identified with the serial number 11 on the type plate.
Product Features
The numbering of the product features shown refers to the illustration of the measur-
ing tool on the graphic page.
1 Plus button[+]
2 Function button
3 Bluetooth® button
4 Measuring button[
5 Colour display
6 Button for selection of the reference level
7 Minus button[–]
8 On/Off button[ ]
9 Battery lid
10 Latch of battery lid
11 Serial number
12 Reception lens
13 Laser beam outlet
14 Laser warning label
15 Laser viewing glasses*
16 Laser target plate*
17 Protective pouch
* The accessories illustrated or described are not included as standard delivery.
1 609 92A 27L | (8.11.16)
]
Bosch Power Tools