Table of Contents
Advertisement
„ Audio
Sound Retriever:
Improve the quality of the compressed audio. Playback sound
of lossy compressed files such as MP3 will be improved. The setting can be
separately set to each input selector. The setting is effective in the signals of
48 kHz or less. The setting is not effective in the bitstream signals.
• It cannot be set if the listening mode is Direct or Pure Direct.
Midnight:
Make small sounds easily heard. It is useful when you need to reduce
the volume while watching a movie late night. You can enjoy the effect only when
playing Dolby series and DTS series input signals.
• It cannot be set if the listening mode is Direct or Pure Direct.
• The setting cannot be used in the following cases.
– If "Loudness Management" is set to "Off" when playing Dolby Digital Plus or
Dolby TrueHD
– When the input signal is DTS:X and "Dialog Control" is other than 0 dB
• If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
„ DSP
Phase Control:
Correct phase disturbance in the low range to enhance the bass.
This enables you to achieve powerful bass reproduction that is faithful to the
original sound.
• It cannot be set if the listening mode is Pure Direct.
Theater Filter:
Adjust the soundtrack that was processed to enhance its high
pitch range, in order to make it suitable for home theater.
• It cannot be set if the listening mode is Direct or Pure Direct.
„ Level
Front:
Adjust the speaker level of the front speaker while listening to the sound.
Center:
Adjust the speaker level of the center speaker while listening to the
sound.
Subwoofer:
Adjust the speaker level of the subwoofer while listening to the
sound.
• If you set the unit to the standby mode, the adjustments you made will be
restored to the previous statuses.
Contents
Connections
≫
84
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
≫
≫
Advertisement
Table of Contents
