Advertisement
OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels attached to your
kettle. It is recommended that before first use
to fill the kettle to the maximum level with cold
tap water, bring to the boil by selecting the
BOIL 212° button, then discard the water. Your
kettle will only operate when positioned on
the power base. The kettle will automatically
switch off when the water has reached the
selected temperature.
OPERATION OF YOUR KETTLE
1.
To fill the kettle, remove the kettle from the
power base and open the lid by pressing
the lid release button. Fill with the desired
amount of water. Always fill the kettle
between the minimum (500 MIN) and
maximum (1700 MAX) marks on the water
window. Too little water will result in the
kettle switching off before the water has
boiled or reached the selected temperature.
2.
Ensure the lid is closed and locked firmly
into place. Position the kettle securely
onto the power base. Insert the power
plug into a 110/120V power outlet. The
START|CANCEL and 212°F BOIL button
surrounds will illuminate in white for one
minute. A beep will sound for two seconds.
The START|CANCEL button surround will
automatically switch off after one minute if
not selected.
NOTE
This appliance is designed for boiling or
heating water only. Never use it to heat or
boil any other liquids or food stuffs. Never
insert tea or coffee into the kettle.
12
BKE720BSS_USC_IB_B15.indd 12
3.
Select the desired water temperature
by pressing one of the five variable
temperature buttons (175˚F, 185˚F, 195˚F,
200˚F, 212˚F). The selected button and
the START|CANCEL button surround will
illuminate in white.
NOTE
If a temperature button is not selected
and the START|CANCEL button is
pressed, the kettle will start heating water
to the default 212ºF or the last selected
temperature.
NOTE
The KEEP WARM function can be
selected before, during or on completion
of the water heating cycle (refer page 10).
4.
Press the START|CANCEL button and the
button surround will illuminate in red and
the kettle will start heating. Do not remove
the kettle from the power base during
operation. Ensure the kettle has switched
off after the water has boiled or the selected
temperature has been reached before
removing the kettle from the power base.
5.
When the kettle has heated the water to the
selected temperature, 3 beeps will sound,
the START|CANCEL button surround
illumination will switch off, and the
selected temperature button surround will
illuminate for 1 minute before switching
off.
5/06/2015 3:33 pm
Advertisement
